Civic/ Integra Parts | JDM | OEM | Mugen | Vision | Desmond
Civic/ Integra Parts | JDM | OEM | Mugen | Vision | Desmond
Shipping and PayPal not included.
On to the goodies...
Desmond Regamaster EVO Centercaps | 4x100/ 5x100 If you know Desmond, you know these centercaps are extremely rare. And especially so in the x100 PCD. They obviously need reconditioning, but that will be simple. They are installed using double sided tape at the base (per Jeff aka Spid5): $300obo
Vision MC Carbon Fiber Mirror Set with EK Coupe/Hatchback OEM Baseplates Mirrors are in good shape. There is no damage. Clearcoat is slightly faded on the top of the mirrors, but is not peeling: $360 shipped
OEM Fitment!
Ready to ship!
Mugen Equipped Badge Badge has the film removed (obviously) and the red lettering within "Equipped" has faded away. No other part of the badge is faded and there is no damage: $50 shipped in the cont. U.S.
SSR Type A centercaps (partsS229) According to the SSR site they will fit " Type-F, Type-C * (Normal/RS/Euro), 4X100, 5x100 VF1, VF1R, MS1, MS1R, SP1, SP1R - PCD. 98-101.65 Cap measurements ~61mm(exc. o ring)/~66mm overall diameter. ~62.8mm with o-ring." They are in very good condition. I have only mounted one once and immediately removed: $100
Number 1 in the picture below.
1994-1997 Acura Integra non-SRS steering column cover This column cover is perfect if you are running an aftermarket wheel in your 94-97 Integra. It will allow you to get rid of that unsightly gap where the SRS reel previously resided: $60
Click here for an example (not my photo)
NOS Rallye Sport fender mirror A beautiful piece of automotive history! Mirror was likely produced in the 60's or 70's and has never been mounted on the car. All hardware is included and is universal fitment. Part of the mirror was painted a satin black (textured) and turned out great. Zero blemishes on this piece aside from the one behind the glass (pictured): $50
DEI Electronics Alarm accessories I purchased these as a kit but did not need them. One is a motion sensor and one is a shock sensor: $20 (motion sensor) & $10 (shock sensor)
Vision Type MC Mirror Set (confirmed genuine by ICB Matt, James at IPG Parts, and others), Integra baseplates (92-95 Civic hb/ coupe baseplates available), very good condition, clear coat in exceptional condition, orig. Vision fiberglass baseplates: SOLD to Khevin
Spoon B-series Carbon Kevlar Plug Cover, ver. 2, great condition: SOLD
Comptech Gen. 1 Rear Subframe Brace, this is the brace that started it all! Here's a chance to own the technology that will be imitated and innovated by many! Item is powdercoated semi-flat black, only used for several months: SOLD to DC2grape
Benen fuel rail (black) with K-tuned fuel line tuck kit: SOLD to ossirisus1
Integra Type R rear strut brace. brace was pieced together using a genuine front brace and aftermarket side brackets. It was then powdercoated black and will include two (2) new in package OEM ITR decals for the brace. All the hardware was replaced with chrome plated pieces ($30+) Will also include factory weather stripping for factory installation and directions for said installation. The center bar is in fantastic shape while the side brackets have several scrapes. Brace will fit all EG/DC/EK cars: SOLD
BNI[P] OEM side mirror block-off plates for 1992-1995 Honda Civic hatchback/ coupe. : GONE
D16Z6 intake manifold, Includes all sensors, IACV, fuel rail, FPR, manifold support bracket, etc.: $50
D16Y8 "Honda" Valve Cover: $50
88-91 Civic/ CRX foglight USDM switch (NOW comes with complete OEM harness, from switch plug to foglight harness plug, includes relay, firewall grommet and fuse, no cut wires), items for this chassis are obviously uncommon and foglight related items are no exception, item is in good shape: SOLD
88-91 Civic Sedan/ Hatchback front mudflaps, another rare item in very good condition, some paint on the items (black and red, see pictures) but all mounting holes are in good shape, very few scratches, will come with mounting hardware: $50
This is on the backside, not the front:
88-91 CRX Passenger Side Mirror block off plate and interior garnish (all hardware included): SOLD
Interested?
Text at 407.233.9623 (Russell)
Vouches (most from Honda-Tech):
Bought from: flcivichb95, AMR Engineering, ImportAutoPerformance.com, signalpuke, BlazedD, MaXtEr, walrus_07, crxfornow, lzylst, ReedMann, RGoose18, IPG Parts
Sold/ Traded with: PNUTPNUTPNUT, phunhaus, DualCamDan, Fibercation, Zer0_SpeedWorks, Khevin (NWP), ossirisus1 (NWP)
On to the goodies...
Desmond Regamaster EVO Centercaps | 4x100/ 5x100 If you know Desmond, you know these centercaps are extremely rare. And especially so in the x100 PCD. They obviously need reconditioning, but that will be simple. They are installed using double sided tape at the base (per Jeff aka Spid5): $300obo
Vision MC Carbon Fiber Mirror Set with EK Coupe/Hatchback OEM Baseplates Mirrors are in good shape. There is no damage. Clearcoat is slightly faded on the top of the mirrors, but is not peeling: $360 shipped
OEM Fitment!
Ready to ship!
Mugen Equipped Badge Badge has the film removed (obviously) and the red lettering within "Equipped" has faded away. No other part of the badge is faded and there is no damage: $50 shipped in the cont. U.S.
SSR Type A centercaps (partsS229) According to the SSR site they will fit " Type-F, Type-C * (Normal/RS/Euro), 4X100, 5x100 VF1, VF1R, MS1, MS1R, SP1, SP1R - PCD. 98-101.65 Cap measurements ~61mm(exc. o ring)/~66mm overall diameter. ~62.8mm with o-ring." They are in very good condition. I have only mounted one once and immediately removed: $100
Number 1 in the picture below.
1994-1997 Acura Integra non-SRS steering column cover This column cover is perfect if you are running an aftermarket wheel in your 94-97 Integra. It will allow you to get rid of that unsightly gap where the SRS reel previously resided: $60
Click here for an example (not my photo)
NOS Rallye Sport fender mirror A beautiful piece of automotive history! Mirror was likely produced in the 60's or 70's and has never been mounted on the car. All hardware is included and is universal fitment. Part of the mirror was painted a satin black (textured) and turned out great. Zero blemishes on this piece aside from the one behind the glass (pictured): $50
DEI Electronics Alarm accessories I purchased these as a kit but did not need them. One is a motion sensor and one is a shock sensor: $20 (motion sensor) & $10 (shock sensor)
Vision Type MC Mirror Set (confirmed genuine by ICB Matt, James at IPG Parts, and others), Integra baseplates (92-95 Civic hb/ coupe baseplates available), very good condition, clear coat in exceptional condition, orig. Vision fiberglass baseplates: SOLD to Khevin
Spoon B-series Carbon Kevlar Plug Cover, ver. 2, great condition: SOLD
Comptech Gen. 1 Rear Subframe Brace, this is the brace that started it all! Here's a chance to own the technology that will be imitated and innovated by many! Item is powdercoated semi-flat black, only used for several months: SOLD to DC2grape
Benen fuel rail (black) with K-tuned fuel line tuck kit: SOLD to ossirisus1
Integra Type R rear strut brace. brace was pieced together using a genuine front brace and aftermarket side brackets. It was then powdercoated black and will include two (2) new in package OEM ITR decals for the brace. All the hardware was replaced with chrome plated pieces ($30+) Will also include factory weather stripping for factory installation and directions for said installation. The center bar is in fantastic shape while the side brackets have several scrapes. Brace will fit all EG/DC/EK cars: SOLD
BNI[P] OEM side mirror block-off plates for 1992-1995 Honda Civic hatchback/ coupe. : GONE
D16Z6 intake manifold, Includes all sensors, IACV, fuel rail, FPR, manifold support bracket, etc.: $50
D16Y8 "Honda" Valve Cover: $50
88-91 Civic/ CRX foglight USDM switch (NOW comes with complete OEM harness, from switch plug to foglight harness plug, includes relay, firewall grommet and fuse, no cut wires), items for this chassis are obviously uncommon and foglight related items are no exception, item is in good shape: SOLD
88-91 Civic Sedan/ Hatchback front mudflaps, another rare item in very good condition, some paint on the items (black and red, see pictures) but all mounting holes are in good shape, very few scratches, will come with mounting hardware: $50
This is on the backside, not the front:
88-91 CRX Passenger Side Mirror block off plate and interior garnish (all hardware included): SOLD
Interested?
Text at 407.233.9623 (Russell)
Vouches (most from Honda-Tech):
Bought from: flcivichb95, AMR Engineering, ImportAutoPerformance.com, signalpuke, BlazedD, MaXtEr, walrus_07, crxfornow, lzylst, ReedMann, RGoose18, IPG Parts
Sold/ Traded with: PNUTPNUTPNUT, phunhaus, DualCamDan, Fibercation, Zer0_SpeedWorks, Khevin (NWP), ossirisus1 (NWP)
Last edited by RussLaviolette; Jun 16, 2014 at 06:31 AM.
Trending Topics
Re: Civic/ Integra Parts | JDM | OEM | Mugen | Vision | Desmond
Please read here: http://hondamarketplace.com/announcement.php?f=60&a=44
Re: Civic/ Integra Parts | JDM | OEM | Mugen | Vision | Desmond
Thread
Thread Starter
Forum
Replies
Last Post
RussLaviolette
For Sale
41
Jun 16, 2014 02:02 PM
We HEART LA
Southern California (Sales)
25
Aug 4, 2012 09:27 PM