FS Tein Flex coilovers Integra/Civic
These Tein Flex coilovers have less than 5,000 miles on them. They were used for two autocross events and were coated with anti-seize for protection against the elements. The Tein Flex coilovers are made for Acura Integras (see DC2 labeling) and will fit EK and EG Honda Civics as well.
I replaced these with a set of Koni Yellows and Ground Controls with custom spring rates due to the car being a dedicated autocross vehicle. These Tein Flex coilovers will provide 2.5+ inches of drop.
Comes with the two coilover tools.
SOLD
The rear coilovers have grease from the removal process. I had to take the rear sway bar off and the bushings had enough grease on them to fry a chicken in. My gloves were coated in it and I have yet to clean them, but will before shipping. The coilover threads have no rust due to the anti-corrosive film sprayed on them.
I replaced these with a set of Koni Yellows and Ground Controls with custom spring rates due to the car being a dedicated autocross vehicle. These Tein Flex coilovers will provide 2.5+ inches of drop.
Comes with the two coilover tools.
SOLD
The rear coilovers have grease from the removal process. I had to take the rear sway bar off and the bushings had enough grease on them to fry a chicken in. My gloves were coated in it and I have yet to clean them, but will before shipping. The coilover threads have no rust due to the anti-corrosive film sprayed on them.
Last edited by sibanez; Nov 13, 2013 at 05:00 PM. Reason: SOLD
Thread
Thread Starter
Forum
Replies
Last Post
masaaki86
Suspension & Brakes
0
Feb 10, 2007 10:08 PM



