After the IM was installed, did you have any problems with the engine running really funnny? Getting codes like "system too lean". Can this be done without hondata on an obd2?

 

Is a tune needed?

 

you're changing airflow on the car, so yes you need a tune.

 

so what's all done to your car that would warrant that intake ?

 

second

 

what bolts on besides exhaust, cold air intake, header, test pipe, underdrive kit, and suspension, can i get away with without a tune?

 

Nothing actually, I just got it from a friend, for free so i thought why not put it on

 

that's a lot of manifold for a stock motor. especially without a tune. you're probably making less than stock power now. congrats.

 

Lol, found that out the hard way. I just finished putting oem manifold back on

 

what bolts on besides exhaust, cold air intake, header, test pipe, underdrive kit, and suspension, can i get away with without a tune

 

with that stuff listed there you can get away with a "basemap" to run around on. pulley kits are a joke, just take the whole AC/PS systems out and get an ATI super damper . even the(not the one you have) intake manifold can be run on a base map for a bit but a tune is shortly after required.

Skunk suggests that ppl make over 350 start looking into the manifold anything below that....just get a pro series one.

 

I probably wouldnt even get the pro series. Manifold is like a final bolt on.. if at all.

Even worse if its a gsr.