LS oil pan with oil drain bung. There are dents on the bottom pan but its still functional: $50 obo shipped
http://i2.photobucket.com/albums/y19...ps0a003453.jpg

OBD1 B16A thottle body: $50 obo shipped
http://i2.photobucket.com/albums/y19...ps5069776b.jpg

RC Autoworks Mini ram horn. Made 503whp with this manfold: $275 obo shipped
2.5" down pipe (5bolt flange) there is a dent on the bottom. Its not too critical:$130 obo shipped
or you can buy the manifold and down pipe for $370 obo shipped
http://i2.photobucket.com/albums/y19...ps1ee63198.jpg
http://i2.photobucket.com/albums/y19...psfa5cefa4.jpg

SC6152E turbo. Not burning oil. However, the cold side is leaking. There is a really small shaft play but its not interfaring on the housing. Made 503whp with this turbo. And I still have the reciept when i bought a new turbine wheel from precision back in 2009. $350 obo shipped
http://i2.photobucket.com/albums/y19...psd20719ce.jpg
Used B18C head studs: $80 firm shipped
http://i2.photobucket.com/albums/y19...ps853abae8.jpg

JDM B16A bare block with crank. Crank still rotates. However, the key way on the crank is chipped off so you need a new crank and the sleeves need to be honed because its been sitting in my garage for a while: $40 FIRM need zip code for shipping and final price.
http://i2.photobucket.com/albums/y19...ps848bce40.jpg
http://i2.photobucket.com/albums/y19...ps61a2c667.jpg
http://i2.photobucket.com/albums/y19...ps0af0b9c6.jpg

Thermal 2.5" exhaust. Need inlet flange: $150 obo shipped
http://i2.photobucket.com/albums/y19...psc7672ea5.jpg
http://i2.photobucket.com/albums/y19/buksit/exhaust.jpg

SP mini ram horn for H22. Handled 533whp. Theres a crack on the weld which i can repair for extra $$$. turbo hotside not included: $340 obo shipped
2.5" to 3" downpipe (5 bolt flange): $170 obo shipped
Or both for $475 obo shipped
http://i2.photobucket.com/albums/y19...ps814eaf7c.jpg

JDM B16A head. I would recommend changing the valve seals. One of the threads on the exhaust side need to be Helicoiled. no cams, valve cover, and vtec solenoid: SOLD

USDM stock B18C short block. Handled 279WHP. Still a good motor. Compression test was at 180psi on all 4 cyclinders with the B16 head: $350 obo need zip for shipping and final price.
http://i2.photobucket.com/albums/y19...ps75f24a53.jpg
http://i2.photobucket.com/albums/y19...psca333aef.jpg

Paypal verified. Add pay pal fees on all prices. Best way to contact me is by text at 815-978-8963. This is just half of the stuff I have in my garage. Once I have time I'll update this thread with more parts for sale. Thanks for looking!

 

Nice price in the block! Shipping in mine was only $100 throw ups! O

How far away are you from stl?

 

4 hours away.

 

BUMP

 

TTT

 

good stuff
bump

 

BUMP

 

TTT

 

BUMP

 

TTT

 

got some great platforms to start a winter project. bump!

 

TTT