Ok, I have just installed a turbo on my 1993 Civic Hatch DX d15B7, now its time to take care of the fuel. I have got a walbro 255, Fuel pressure regulator, and DSM black top 450cc injectors. The injectors I got with a resistor box, but Im not 100% sure that it is one from a dsm or one from a honda, so ill post a picture of it with this post. Ive seen alot of pictures of both honda and dsm ones, and the look pretty much the same except for maybe a couple tabs on the ends?!? If it did happen to be a honda resistor box will that still work with dsm 450s? I have read that the 450s are either high or low and no matter what i need some sort of resistor box. I was also considering just doing an inline resistors. That might be even easier, so my question is, what resistors from radio shack do i need??!? Please Help!!!

I guess this wont let my post a picture for some reason so here is the link to the picture of the resistor box I have:

http://i159.photobucket.com/albums/t...ps7a6b4cb5.jpg

 

Looks like an OBD0 MPFI Honda resistor box to me. 88-91 Civic/CRX Si maybe?