Notices

FULLY BUILT B18C1

Thread Tools
 
Search this Thread
 
Old Jul 11, 2013 | 11:18 PM
  #1  
evo8turbo2000's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2008
Posts: 43
Likes: 0
From: palmdale, ca, 93552
Default FULLY BUILT B18C1

selling my fully built gsr motor has 0 miles on build. block has benson sleeves stock bore crower billet rods arias pistons acl race bearings fully balanced crank arp l19 headstuds. head is fully ported and polished done by portflow has ferrea valvetrain Inconel valves gsr cams. engine was built to put down over 800-1000 hp. selling it because my gf passed away so my project has to go. asking 4500 just for the longblock have over 8k invested just on block price is firm please no low ballers thanks
Attached Images  
Old Aug 7, 2013 | 01:52 AM
  #2  
ryc555's Avatar
Honda-Tech Member
 
Joined: Nov 2006
Posts: 2,024
Likes: 0
Default Re: FULLY BUILT B18C1

WARNING! This seller is full of drama and won't tell you the truth! I bought his transmission, suspension, manifold, tial, wires. His claiming trans was fully rebuild with new hubs and sliders, carbon synchros and has wavetrac diff. I asked him if its cuffed he said no its not. So, my plan is to cuff it. I received the parts in box that has hole, it was missing wires, spanner wrench and the vss was cracked. Next day, I opened the transmission to install a cuff. I was surprised, it has an old school kaaz not wavetrac. I immediately contacted him and asked what diff is this? He said, I swear its a wavetrac,it came from my boy jayson, his a good fab, knows everything blah blah blah. I said, I want the one I paid for and pls send that to me. One more thing the trans did not have new sliders and hubs, old synchros. So, I proceeded and was planning to just forget and just use this old school one until I noticed a chunk of metal sticking out inside the diff! I sent him as many pix as I could but the drama artist won't believe me. He even told me I'm trying to get him. At least, be honest and tell the truth! Careful everyone this is the second time I've been screwed. I have to deal this with paypal!

Last edited by ryc555; Aug 7, 2013 at 09:40 AM.
Old Aug 7, 2013 | 08:24 AM
  #3  
olddohc's Avatar
Honda-Tech Member
iTrader: (116)
 
Joined: Nov 2002
Posts: 1,460
Likes: 0
From: Orange County, CA, USA
Default Re: FULLY BUILT B18C1

^^^
Sorry to hear that. I know you were probably fuming when you wrote that so you typed it really fast. If I were you I would proof read it. Some of it is confusing and doesn't make sense. Overall really bad grammar.

Last edited by olddohc; Aug 7, 2013 at 08:39 AM.
Old Aug 7, 2013 | 09:06 AM
  #4  
ek9junky's Avatar
Honda-Tech Member
iTrader: (2)
 
Joined: Mar 2005
Posts: 247
Likes: 0
From: ca, usa
Default Re: FULLY BUILT B18C1

Originally Posted by evo8turbo2000
selling my fully built gsr motor has 0 miles on build. block has benson sleeves stock bore crower billet rods arias pistons acl race bearings fully balanced crank arp l19 headstuds. head is fully ported and polished done by portflow has ferrea valvetrain Inconel valves gsr cams. engine was built to put down over 800-1000 hp. selling it because my gf passed away so my project has to go. asking 4500 just for the longblock have over 8k invested just on block price is firm please no low ballers thanks
Well on a side note if you really lost your girl (passed away) i am sorry to hear man my condolences to you and your fam.
Old Aug 8, 2013 | 07:42 AM
  #5  
kingofbattle909's Avatar
Honda-Tech Member
iTrader: (6)
 
Joined: Jun 2008
Posts: 1,316
Likes: 0
Default Re: FULLY BUILT B18C1

glws
Old Aug 8, 2013 | 07:50 AM
  #6  
R-Spec Ferio's Avatar
Honda-Tech Member
 
Joined: Jul 2013
Posts: 30
Likes: 0
From: Ripperside Ca
Default Re: FULLY BUILT B18C1

there were no bumps either after original posting. not serious or sold...
Old Aug 8, 2013 | 11:39 AM
  #7  
bretx0r's Avatar
Honda-Tech Member
 
Joined: Mar 2002
Posts: 6,606
Likes: 0
From: Northern CA
Default Re: FULLY BUILT B18C1

Originally Posted by ryc555
WARNING! This seller is full of drama and won't tell you the truth! I bought his transmission, suspension, manifold, tial, wires. His claiming trans was fully rebuild with new hubs and sliders, carbon synchros and has wavetrac diff. I asked him if its cuffed he said no its not. So, my plan is to cuff it. I received the parts in box that has hole, it was missing wires, spanner wrench and the vss was cracked. Next day, I opened the transmission to install a cuff. I was surprised, it has an old school kaaz not wavetrac. I immediately contacted him and asked what diff is this? He said, I swear its a wavetrac,it came from my boy jayson, his a good fab, knows everything blah blah blah. I said, I want the one I paid for and pls send that to me. One more thing the trans did not have new sliders and hubs, old synchros. So, I proceeded and was planning to just forget and just use this old school one until I noticed a chunk of metal sticking out inside the diff! I sent him as many pix as I could but the drama artist won't believe me. He even told me I'm trying to get him. At least, be honest and tell the truth! Careful everyone this is the second time I've been screwed. I have to deal this with paypal!
Looks like OP is going to have to disassemble the motor, take pictures and then reassemble in order to preserve the integrity of his sale. If you did lose your girlfriend, condolences, but don't rely on a buyers empathy to help you sell parts dishonestly.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evo8turbo2000
For Sale
2
Aug 7, 2013 01:51 AM
danedoremus
For Sale
15
May 18, 2011 07:50 AM
Mannykiller
For Sale
8
Dec 7, 2009 04:13 PM
unclebenwho
Mid-West (Sales)
33
Jul 23, 2008 07:34 PM
unclebenwho
For Sale
57
Jul 23, 2008 07:33 PM




All times are GMT -8. The time now is 10:42 AM.