I am selling my turbo build i am moving out due to foreclosure on my home and i am not going to have anywhere to keep this stuff since i am renting an apartment and need money. I am paypal 100% certified and i can ship to anywhere in the 48 states within the USA. My paypal email is tonybuiltracing@gmail.com, my phone number is (818)590-9931

Golden Eagle sleeved B18c to 84mm with grooves so you can use o-rings on the block, has Arias pistons (9.3:1) with upgraded HD wrist pins, Manley turbo tuff rods for b18c, b18c crankshaft it was all balanced to 11,000 rmp, Golden Eagle plugs for the oil squirters, ITR oil pump, oem baffle, oem oil pan. I send the block, pistons, and rotating assembly to Golden Eagle where they blueprinted the whole block i just needed to buy bearings and install them and aseemble the block. I am asking for $2,700 shipped and paypal fees included

2000 ITR head with supertech dual valve springs and Titanium retainers includes cam caps, hondata im gasket, and OEM b18c1 dustributor obd1, no valve cover, intake, cams, etc... asking $700

Edelbrock Victor X manifold $250
RPM 76mm throttle body $150
OEM b18c Golden Eagle head gasket 84mm $110 new
Golden Eagle cam gears b series $160 new
Golden Eagle fuel rail b series $110 new
Golden Eagle head studs b18c $130 new
ARP b18c head studs $70 used
Full Race traction bar $175 new
Hondata 4 bar map sensor $50 used
AEM injector driver $100 used
Golden Eagle LS/Vtec conversion sandwich kit $100 used to dyno only

 

Nice I had the same block setup, good luck with ur sale..

 

Bump for look

 

Thanks guys wish I can keep this stuff to finish my SFWD Eg

 

What do the traction bars fit and are they the pro am?

 

Thanks for a smooth deal man. Can't wait to get that block.

Bump for a good seller!

 

H power ej they fit a Eg ek DC I believe its a regular one not sure if its pro am but I will post a pic up so you can see it.
Ryc555 thank you!

 

Ttt

 

Up

 

interested in the full race traction bar. send me pics please

 

interested in the traction bars

 

killer deal for that traction bar... some one grab that...

 

Traction bar sold.
Block sold.Deposit
Throttle sold.Deposit

 

Hey do you have a pic of that map sensor? Just want to make sure itll fit my D17. Thanks

 

Pm'd

 

Will you ship to Canada?

 

MatthewHughes yes as long as you pay the shipping amount

 

Hondata 4 bar map sensor sold!
Fuel rail and camgears sold!

 

Ttt

 

interested in intake mani,,located in LA,,lmk when ur available

 

Fair warning to everyone. This dude has not ship my block that was already paid off.. I hope I can get my money back.

 

Thanks for the heads up. I sent him a message about his head gasket and he hasn't responded in about a week.

 

Stay away from this seller. His shady and crook he assembled the block put on the pistons and rings with no lube what a dum dumb, now the walls have a premature wear. Put the piston number 3 in number two cylinder and his claiming GE fully balanced it? He put a used oil pump, no oil pan, no water pump, head gasket is new but damaged, no spec and paperwork from GE. Most bad part the groove tip of the crank is chipped and won't hold the key lock for the pulley! This dumb dumb claiming he has paper work to go with this shitty block but it does'nt have. Good thing I payed for pp fee and they will give me a full refund! Stay away from this seller!

 

I dont know why he would assemble it when its unassembled in the pictures.
Ryc555 are you looking to unload this? Im interested in the block.