H22 ecu
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 723
Likes: 0
From: Eden Prairie, MN, U.S.A
H22 ecu
Just wondering is there any way
to tell by looking at a motor if
it's OBD1 or OBD2. and can you
use a OBD2 ECU on a OBD1 motor.
[Modified by Jago, 4:22 AM 10/23/2002]
to tell by looking at a motor if
it's OBD1 or OBD2. and can you
use a OBD2 ECU on a OBD1 motor.
[Modified by Jago, 4:22 AM 10/23/2002]
New User
Joined: Aug 2001
Posts: 292
Likes: 0
From: Las Vegas, Nv, usa
Re: H22 ecu (Jago)
look at the distributor, one plug is obd2 and two separate plugs is obd 1
look at the crank pully if there is a sensor at the base of the pully, then the motor is obd2
look at the head on the block, look at where the headers are, take them off and look closer, the yr is stamped on the head
look at the crank pully if there is a sensor at the base of the pully, then the motor is obd2
look at the head on the block, look at where the headers are, take them off and look closer, the yr is stamped on the head
Thread
Thread Starter
Forum
Replies
Last Post
mudshuvelz
Honda Civic / Del Sol (1992 - 2000)
1
Jul 12, 2005 07:48 PM