FS: 02 RSX-S swap.
I'm selling my swap from my previous Rsx. It's only the transmission and motor. Motor has a spun bearing. No damage to the crank and its only on rod number 3. Motor is missing water pump and thermostat housing and no knock sensor. I have no harness either. I have the axles one of them is new. Motor had 93k or 97k miles. I ended up getting a complete swap for cheap that's why I pulled out the swap complete. I've been holding on to it with the intentions of building it and and building another honda. Between my g35 and sti I doubt ill be building another honda anytime soon.Looking to clean up the garage and fund my other projects. I'm thinking 1500 for every thing. I'm having trouble posting pics. You can text me I can send you some. 661-9030315
Last edited by worx; Apr 12, 2013 at 05:35 PM.
Trending Topics
I've been trying to upload pic through photobucket but it keeps failing. I can email them to some one and they post them for me.
As far as proof of the crank. I have no cherry picker or anything to hoist it up to pull the pan.
As far as proof of the crank. I have no cherry picker or anything to hoist it up to pull the pan.
then how can u confirm there is no crank damage in your original post
When I first had the rod knock I pulled the oil pan to see how bad it was. After assessing the damage I noticed it wasn't bad at all so I ordered a new bearing I was just gonna replace and hopefully lasted since it was my only car at the time. I had a friend come to lend a hand and that's when he offered to sell me his complete swap so I went that route swap was in that day and I was back on the road. It's been over 2yrs since that I had plans on building something but, as time goes I get farther from Hondas.
Thread
Thread Starter
Forum
Replies
Last Post




