PA 1997 honda prelude turbo
For sale: 97 Prelude with 87,500 miles. less than 2000 miles on the engine build and turbo setup. The car is currently making 430 hp on pump gas and is tuned by Joe at Tempest Racing. The car has been garage kept and has no rust. If you have any questions or want different pictures just ask. I have receipts for $16,000 in parts and labor for engine built
The car ran 11.0@ 139 with 1600cc injectors but not been raced on the 1000cc setup.
Asking price: $9000 not looking for trades
Interior
Autometer gauges (boost, oil pressure, EGT)
Innovate wideband air fuel gauge
2003 Civic SI steering wheel (will include factory steering wheel with airbag)
Greddy Turbo Timer
Type SH rear deck
Suspension
Custom rate Eibach springs on skunk 2 sleeves (1000lb rear, 650lb front)
Tokico illumina Shocks
17x7.5 Rota Sub-zero wheels (white)
Transmission
Fidanza 7.5 lb flywheel
ACT 6 puck clutch
Quaife LSD
Drive shaft shop stage 3 axles and hubs with extended ARP studs
Engine
H22a4 Sleeved 88.5mm block
Wiseco 9:1 pistons
Manley Rods
GT40R Turbo
Full-race Top mount exhaust manifold
Full-race 3" downpipe
3" exhaust with RPI muffler (includes race pipe adaptor)
Tial 40mm wastegate
Greddy type R Blow off valve
Golden Eagle Intake Manifold
Precision 750hp intercooler
AEM EMS with 5 bar map sensor
Prodrive oil pump gear
ARP head studs
Ferrea valve springs and titanium retainers
Golden Eagle adjustable cam gears with magnets for T1 kit
T1 cam trigger kit
MSD 6a ignition box
MSD blaster 2 coil and spark plug wires
-AN fuel lines
Aeromotive A1000 fuel pump
Aeromotive fuel filter
Aeromotive fuel pressure regulator
STR fuel Rail
Precision turbo 1000 cc injectors
B&M oil cooler
Custom oil catch can
PWR Civic radiator
Flex-a-lite radiator fan
Mugen thermostat
Unorthodox under drive power steering and alternator pulleys
Red valve cover
more pictures available upon request.













The car ran 11.0@ 139 with 1600cc injectors but not been raced on the 1000cc setup.
Asking price: $9000 not looking for trades
Interior
Autometer gauges (boost, oil pressure, EGT)
Innovate wideband air fuel gauge
2003 Civic SI steering wheel (will include factory steering wheel with airbag)
Greddy Turbo Timer
Type SH rear deck
Suspension
Custom rate Eibach springs on skunk 2 sleeves (1000lb rear, 650lb front)
Tokico illumina Shocks
17x7.5 Rota Sub-zero wheels (white)
Transmission
Fidanza 7.5 lb flywheel
ACT 6 puck clutch
Quaife LSD
Drive shaft shop stage 3 axles and hubs with extended ARP studs
Engine
H22a4 Sleeved 88.5mm block
Wiseco 9:1 pistons
Manley Rods
GT40R Turbo
Full-race Top mount exhaust manifold
Full-race 3" downpipe
3" exhaust with RPI muffler (includes race pipe adaptor)
Tial 40mm wastegate
Greddy type R Blow off valve
Golden Eagle Intake Manifold
Precision 750hp intercooler
AEM EMS with 5 bar map sensor
Prodrive oil pump gear
ARP head studs
Ferrea valve springs and titanium retainers
Golden Eagle adjustable cam gears with magnets for T1 kit
T1 cam trigger kit
MSD 6a ignition box
MSD blaster 2 coil and spark plug wires
-AN fuel lines
Aeromotive A1000 fuel pump
Aeromotive fuel filter
Aeromotive fuel pressure regulator
STR fuel Rail
Precision turbo 1000 cc injectors
B&M oil cooler
Custom oil catch can
PWR Civic radiator
Flex-a-lite radiator fan
Mugen thermostat
Unorthodox under drive power steering and alternator pulleys
Red valve cover
more pictures available upon request.













Last edited by TurboLude97; Apr 4, 2013 at 08:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post



