does anyone make a side draft carb setup for the ek1 . iv found several down draft but no real side drafts . or maybe an adaptor kit for a webber side draft . thanks for any help

 

I've seen motorcycle carbs adapted

 

None of the sidedraft manifolds out there are being made anymore. You'll either have to find a used one, or make one.

 

These people make them still.

http://www.manifolds.co.za/

 

Not for the EK engines.... Unless they are not listed on their website.

 

Send them an email. I am sure they have what is needed.

 

Very, very hard to find. Everyone I have found have been for the 79-81 ports and none for the 82-83 motors - and all but one were for the 8 valve EL heads, not the CVCC ones....the one I do speak of was Yahoo Japan.

The commercial ones were made by AT Engineering, Harada and a single by Lynx. If you go here, and scroll to the bottom, there are some pics....

http://www.roadsailing.com/ELEK.html