Hi All,

I bought a '94 Del Sol back in July and my dad & I are getting close to having it pass inspection. The electrical was all great until after replacing the engine mounts - we must've bumped something. Now when we turn the key nothing happens, no noises, no power to the dashboard, nothing.

Checking the voltage on various connections: Everything we can get to through the hood is hot. We checked the starter, the fuse box inside the engine compartment, the battery, ect. All were hot, but no power is getting to the ignition.

We cleaned the terminals on the battery. We changed the relay under the drivers side dashboard.

Any suggestions on what we should check next would be quite appreciated.
Thanks,
Nick

 

I just tried to jump the starter and nothing happened. It didn't even spark.

 

try changing the ground wire to a different part of the body or the engine.

 

Sounds like you pinched a wire and ended up cutting it. Did you check the wires for continuity?