Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

1996 Hatch K24/20 project

Thread Tools
 
Search this Thread
 
Old Feb 18, 2013 | 06:01 PM
  #1  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default 1996 Hatch K24/20 project

Hey guys been on this site for a while ... just have been into other cars (240sx mostly) always been an in the closet honda lover however ... so here is my current project

EK Mods
-K24A1 Block

-Brand New OEM HG

-K20Z3 Head

-K20Z3 Cams

-K20A2 Oil Pump/Pan

-K20Z3 Idler Pulley

-K20Z3 Oil Cooler

-RBC Intake Manifold

-TB Adapter Plate

-CPR Underdrive Pulley

-AEM Air Filter

-Hybrid Header
-Test Pipe
-Custom Exhaust

-K20Z3 Trans LSD

-RSX Harness

-AEM EMS

-Ktuned Rail/Lines/FPR

-Walbro 255

-Ktuned VSS Converter

-Ktuned Jumper Harness

-Karcepts Shifter

-EG Subframe

-Hasport EKK2 Mounts

-CM Pressure Plate

-Koyo Radiator

-Mishimoto Fan Shroud

-Spoon Reservoir Socks

-Tein Basics

-ASR Brace

-Red Beaks Bar

-Blox LCAs

-Blox Lug Nuts

-Volk TE37 16x7
-JDM OEM ITR Wheels 15 (4x114.3)

-ITR 4x114.3 Swap
-Rear Disc Conversion
-CoRaceFab Traction Bar

-CTR Spoiler

-Red CTR Emblem

-JDM Folding Mirrors

-Dark Grey Interior

-Power Windows

-SI Cluster

-CF Bezel

-99-00 Climate Control

-OEM Radio Block Off

-S2000 Steering Wheel

-Clifford Alarm

Few Pics ... work in progress .. currently tearing out motor and painting engine bay back to black and redoing a few wiring clutters!











any help or criticism good or bad is excepted...
Reply
Old Feb 18, 2013 | 06:51 PM
  #2  
DjAccurate's Avatar
Honda-Tech Member
 
Joined: Jun 2012
Posts: 19
Likes: 0
Default Re: 1996 Hatch K24/20 project

Good idead on getting the bay repainted the green got to go.....Nice civic tho
Reply
Old Feb 18, 2013 | 07:16 PM
  #3  
stcopley's Avatar
Honda-Tech Member
 
Joined: Jul 2012
Posts: 10
Likes: 0
From: Minnesota
Default Re: 1996 Hatch K24/20 project

Love the look of it man. Any dyno results? Half tuck when they bay is repainted wouldn't be bad either.

And yea, gotta get rid of that green man.
Reply
Old Feb 18, 2013 | 07:26 PM
  #4  
Marvin1985's Avatar
Honda-Tech Member
iTrader: (5)
 
Joined: Jun 2011
Posts: 1,119
Likes: 1
From: pa
Default Re: 1996 Hatch K24/20 project

Digging the VX wheels lol
Reply
Old Feb 19, 2013 | 02:58 PM
  #5  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

Them ITR wheels. :-)

No dyno just yet. Had some issues got them all figured out n now just wanna make it look good before I bring it out.
Reply
Old Aug 5, 2013 | 04:54 PM
  #6  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

did a little work on it ... few updated pics









Reply
Old Aug 5, 2013 | 05:23 PM
  #7  
azzazel_9's Avatar
Honda-Tech Member
 
Joined: Jul 2012
Posts: 360
Likes: 0
From: Dallas, Tx
Default Re: 1996 Hatch K24/20 project

im jelly......really wish i could have waited a little longer and grabbed a hatch over my coupe. I will probably buy one or talk my wife into that way i have best of both worlds. Great so far man looks really great.
Reply
Old Aug 5, 2013 | 05:52 PM
  #8  
k20eksedan's Avatar
Honda-Tech Member
 
Joined: Aug 2013
Posts: 2
Likes: 0
Default Re: 1996 Hatch K24/20 project

Originally Posted by Turbo24sxt
Hey guys been on this site for a while ... just have been into other cars (240sx mostly) always been an in the closet honda lover however ... so here is my current project

EK Mods
-K24A1 Block

-Brand New OEM HG

-K20Z3 Head

-K20Z3 Cams

-K20A2 Oil Pump/Pan

-K20Z3 Idler Pulley

-K20Z3 Oil Cooler

-RBC Intake Manifold

-TB Adapter Plate

-CPR Underdrive Pulley

-AEM Air Filter

-Hybrid Header
-Test Pipe
-Custom Exhaust

-K20Z3 Trans LSD

-RSX Harness

-AEM EMS

-Ktuned Rail/Lines/FPR

-Walbro 255

-Ktuned VSS Converter

-Ktuned Jumper Harness

-Karcepts Shifter

-EG Subframe

-Hasport EKK2 Mounts

-CM Pressure Plate

-Koyo Radiator

-Mishimoto Fan Shroud

-Spoon Reservoir Socks

-Tein Basics

-ASR Brace

-Red Beaks Bar

-Blox LCAs

-Blox Lug Nuts

-Volk TE37 16x7
-JDM OEM ITR Wheels 15 (4x114.3)

-ITR 4x114.3 Swap
-Rear Disc Conversion
-CoRaceFab Traction Bar

-CTR Spoiler

-Red CTR Emblem

-JDM Folding Mirrors

-Dark Grey Interior

-Power Windows

-SI Cluster

-CF Bezel

-99-00 Climate Control

-OEM Radio Block Off

-S2000 Steering Wheel

-Clifford Alarm

Few Pics ... work in progress .. currently tearing out motor and painting engine bay back to black and redoing a few wiring clutters!











any help or criticism good or bad is excepted...
nice
Reply
Old Aug 5, 2013 | 06:09 PM
  #9  
B_Swapped93's Avatar
Honda-Tech Member
 
Joined: Sep 2012
Posts: 9,721
Likes: 13
From: Toronto,Ontario
Default Re: 1996 Hatch K24/20 project

i'll bet that's a TON of fun ! dd ? are you in the process of turboing it ? I see the hood cut out and intercooler.

would dd the **** out of that if I had that K24
Reply
Old Aug 5, 2013 | 06:11 PM
  #10  
sick_lsv's Avatar
Trial User
 
Joined: Aug 2013
Posts: 1
Likes: 0
Default Re: 1996 Hatch K24/20 project

keep it going
Reply
Old Aug 5, 2013 | 06:18 PM
  #11  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

Just need to finish the tune. Drives and cruises amazingly. Isn't a total DD but a fun weekend track car.

Will keep updated when things change. Borg warner s366 is the turbo, aem ems, id1000s are basic
Reply
Old Aug 5, 2013 | 07:08 PM
  #12  
Marvin1985's Avatar
Honda-Tech Member
iTrader: (5)
 
Joined: Jun 2011
Posts: 1,119
Likes: 1
From: pa
Default Re: 1996 Hatch K24/20 project

Interior shots?
Reply
Old Aug 5, 2013 | 08:28 PM
  #13  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

Just need to finish the tune. Drives and cruises amazingly. Isn't a total DD but a fun weekend track car.

Will keep updated when things change. Borg warner s366 is the turbo, aem ems, id1000s are basic
Reply
Old Aug 12, 2013 | 01:40 PM
  #14  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

little update: 12 psi on gauge 9 psi on aem and map sensor... pump e85 n 11.2:1 afr keep it safe ..




Reply
Old Aug 14, 2013 | 06:24 AM
  #15  
Bones0nfire's Avatar
Honda-Tech Member
 
Joined: Aug 2009
Posts: 18
Likes: 0
From: Jacksonville, NC
Default Re: 1996 Hatch K24/20 project

Nice dyno numbers and nice car. I'm for sure jelly.
I would love to do this to my 4door.
Reply
Old Sep 12, 2013 | 05:13 PM
  #16  
Turbo24sxt's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2006
Posts: 53
Likes: 0
From: Loveland/FT. Collins, CO, USA
Default Re: 1996 Hatch K24/20 project

got her ready for the track .. detuned to 450 hp and smoothed out the power curve ....

M&H 24.5




best for the day was 11.8 @ 125 with a 1.8 60ft
Reply
Old Sep 12, 2013 | 05:20 PM
  #17  
midwest_920's Avatar
Honda-Tech Member
 
Joined: Apr 2013
Posts: 3
Likes: 0
Default Re: 1996 Hatch K24/20 project

Nice number on it.. ill b doing a kswap soon.. got the motor.. just waiting for cash to get the rest if the parts..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JDM_JNKY
Southern California (Sales)
5
Feb 23, 2015 08:55 PM
ceepandas
Vehicles for sale
12
Oct 24, 2014 11:22 PM
ceepandas
Southern California (Sales)
32
Oct 7, 2014 06:19 PM
hysteria411
Mid-West (Sales)
2
Feb 15, 2013 05:45 AM
jasonc84
Honda Civic / Del Sol (1992 - 2000)
4
Mar 7, 2006 01:02 PM




All times are GMT -8. The time now is 08:08 PM.