New rims for summer 2013!
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,344
Likes: 1
From: Ontario & Alberta, Canada
From this:


16" Gunmetal ITR
To this:

16 x 7 +44 Work RSZ-R
Near new condition, were installed on a showroom car for years, never used on the road.
Nothing special to some people, pretty ballin' to me, since I usually rock OEM or oldschool.
Still need to order a new set of Bridgestone Potenza RE-11's, my current RE-11's are done.
Sorry in advance for the poor quality Iphone4 pix. Just test fitting them for now.


16" Gunmetal ITR
To this:

16 x 7 +44 Work RSZ-R
Near new condition, were installed on a showroom car for years, never used on the road.
Nothing special to some people, pretty ballin' to me, since I usually rock OEM or oldschool.
Still need to order a new set of Bridgestone Potenza RE-11's, my current RE-11's are done.
Sorry in advance for the poor quality Iphone4 pix. Just test fitting them for now.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,344
Likes: 1
From: Ontario & Alberta, Canada
I do like the gunmetal. It seems to compliment the Milano Red nicely. Although, I agree about changing it up, but these became available at a price I couldn't pass up and I've wanted a set for 10+ years, so I had to have them.
Thanks for the positive feedback so far everyone!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,344
Likes: 1
From: Ontario & Alberta, Canada
Thanks everyone, means alot, even though the picture is sub-par at best. Just a test fit. Picking up some new Bridgestone Potenza RE-11's this month.
The EJ will be getting a trans rebuild/upgrade aswell as CRV front knuckles/hubs/bearings to fit the new RSX-S 36mm axle setup with extended balljoints. Looking to put some mid-high 11's down at the track this summer in current street trim at 400-440whp @ 2600lbs w/me in it.
By the spring I will have it ready to go again with a new race gas tune and more upgrades. Fresh pix will be posted when it's finished.
Thanks again!
The EJ will be getting a trans rebuild/upgrade aswell as CRV front knuckles/hubs/bearings to fit the new RSX-S 36mm axle setup with extended balljoints. Looking to put some mid-high 11's down at the track this summer in current street trim at 400-440whp @ 2600lbs w/me in it.
By the spring I will have it ready to go again with a new race gas tune and more upgrades. Fresh pix will be posted when it's finished.
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post






