FS: FLORIDA: REAL Mugen Twin Loop full cat back exhaust 92-00 civic coupe/sedan
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 389
Likes: 0
From: Tampa, FL, USA
wrong application. 97-01 prelude
Last edited by Tampa94lsteg; Jan 21, 2013 at 05:27 PM.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 389
Likes: 0
From: Tampa, FL, USA
How's that? The rear ends of a civic and a teg are completely different... Unless you chopped this thing up hardcore, it's IMPOSSIBLE for it to fit on the teg... I know some people just say "extend the pipe a little", but that's dumb, who chops up a $1200 exhaust??? Ricers, That's who.
Thanks, I guess?
Thanks, I guess?
Trending Topics
How's that? The rear ends of a civic and a teg are completely different... Unless you chopped this thing up hardcore, it's IMPOSSIBLE for it to fit on the teg... I know some people just say "extend the pipe a little", but that's dumb, who chops up a $1200 exhaust??? Ricers, That's who.
Thanks, I guess?
Thanks, I guess?
Actually, I ran an ITR sedan catback on my 94 dx and it was spot on fitment with no modification needed; 2dr integra was an inch or two short IIRC. I see where you're coming from with not wanting to chop an expensive and rare exhaust after being sold the wrong piece but you're complaints seem a little drastic.
Anyway, good luck with the sale.
Anyway, good luck with the sale.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 389
Likes: 0
From: Tampa, FL, USA
Actually, I ran an ITR sedan catback on my 94 dx and it was spot on fitment with no modification needed; 2dr integra was an inch or two short IIRC. I see where you're coming from with not wanting to chop an expensive and rare exhaust after being sold the wrong piece but you're complaints seem a little drastic.
Anyway, good luck with the sale.
Anyway, good luck with the sale.
...and thanks nick
The civic and integra share the same basic frame layout including trailing arms and subframe. The rear ends are actually physically similar as is the exhaust channel under the car from front to rear.
But like I said, it still sucks that were sold the wrong exhaust and I do feel you on not wanting to modify anything to make it fit properly.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 389
Likes: 0
From: Tampa, FL, USA
I'm just noting "the ends of a civic and teg" are NOT completely different nor do you have to "chop up" the exhaust.
The civic and integra share the same basic frame layout including trailing arms and subframe. The rear ends are actually physically similar as is the exhaust channel under the car from front to rear.
But like I said, it still sucks that were sold the wrong exhaust and I do feel you on not wanting to modify anything to make it fit properly.
The civic and integra share the same basic frame layout including trailing arms and subframe. The rear ends are actually physically similar as is the exhaust channel under the car from front to rear.
But like I said, it still sucks that were sold the wrong exhaust and I do feel you on not wanting to modify anything to make it fit properly.
"modifying" and "chopping" are the same to me when it comes to a $1200 exhaust.
Anyway, thanks for the bumps
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 389
Likes: 0
From: Tampa, FL, USA
BC, make me an offer shipped, pm me your zip code and I'll see what UPS says. thanks.



