301whp 209wtq

We just finished some testing on our updated KMOD stg.3 K20/K24 Longblocks w/
3.5in CAI
84mm TB
GATO IM
K20a2 cyl. Head
BC Stg.3 Cams
Supertech Valvetrain
87.5mm Supertech 12.5:1 Pistons
Eagle Rods
KMOD Oil Pump/Pan
ASP Header
KMOD 3in exhaust

Tuned on K-Pro

Video-



-Marquis
-KMOD

 

Nice!

Brian Crower cams? How are those working for you?

 

am i missing something? that looks like a fairly simple parts list !

i havent gotten to fully enjoy my stock tsx motor , but i can only imagine what 200 wtq feels like

 

Awesome numbers! 84 mm tb?!

 

See how the torque starts falling off at about 7,000 rpm? That doesn't happen with my 9.0 intake manifold. The torque curve stays flat up to 8,300 where it starts tapering off so the HP peak occurs right at 9,000.
You could make substantially more HP than this.
What's the max VTC?

 

should have revved it to 8800-9000 to see what it would have made

 

Whys that? So u can hear a bunch of noise?

 

it looked like the power was still climbing. I thought it might make more power but I guess not because I read on k20.org that it didn't make more.

 

Once the torque has fallen off enough that the HP curve goes flat, its NOT coming back up again unless you start pumping Nitrous into it.

 

BC = Buddy Club or Brian Crower?

 

Good power. That thing has to be a blast to drive

 

BC= Brain Crower Stg.3 Cams

-Marquis
-KMOD

 

Looking good. Keep up the good work.

Stefan

 

What's the point of tuning with the intake like that?

 

Probably testing what lengths work best, then figuring out how to make that length fit and test it again.

 

Very nice!!!

 

looks good, must be a blast to drive....

 

Wow those are some good numbers.

 

what fuel was the car tuned on?

 

sweet frank built...

 

nice nice nice project and #s!!

 

Is this on E85?

 

How much for that motor set up?