NV 1993 Civic hatch 11sec All-Motor by LDL speedshop
Thread Starter
Junior Member
Joined: Sep 2005
Posts: 21
Likes: 0
From: SIN CITY, USA
1993 Civic hatch 11sec All-Motor by LDL speedshop
93 civic hatch (clean title)
11sec All-Motor
fully built by LDL speedshop
B16a Head
B18c Block
Stroker Kit (92 mm)
-Sleeve Block-Bore n Hone
-92 mm Crankshaft, Lightened and Balanced
-1 set Endyn Pistons (Custom for 92 mm Crankshaft)
-1 set Pauter Rods (Custom for 92 mm Crankshaft)
-1 Custom Head Gasket
-1 set ARP Head Studs
Port/Polish Cylinder Head
-3 Angle Valve Job
-Replace Valve Guides with Bronze
-Brand new OE Valve Stem Seals
-Wash and Re-Surface
Open up Combustion Chamber
-Match to 85 mm Block
Match Port Intake Manifold
-Victor X intake manifold
Parts:
Valve Train Kit
-1 set Skunk2 Stage 3 Cams, Portflow Springs and Retainers, Skunk 2 Cam Gears
Type R transmission LSD w/ final gear
ACT extreme clutch
9lb lightend flywheel ACT
DTR six sigma headers with Megaphone
Hasport Mounts (Race)
B & M Fuel Pressure Regulator
B & M Fuel Pressure Gauge
Walbro Fuel Pump
440 cc Injectors
72/70 Throttle Body
Hondata S300
Brand New Distributor
CTR Pulley
Suspenssion:
-Tokico Struts
-Skunk2 Drag Launchers
Exterior:
-Carbonfiber Hood
-JDM wing (long led light)
-Rota Wheels (not on pic)
•engine work and power train parts alone cost over $10k
•only have 1500 miles on the power train and only 6 passes in the track
•Mustang Dyno 264whp and 185lbs of torque
•best 1/4 mile time: 11.8secs (with interior)
•fully built and tuned by LDL speedshop
* asking price $8,000 obo
* for $10k you can take the car and all the Honda parts in my garage!
-GSR tranny
-B16a head (complete)
-(2) S2000 seats (black)
-Bogarts (all 4rims with slicks)
-4more set of slicks
-JDM parts for EG
•jdm headlight
•jdm fog lights
•side markers
•jdm vin plate
•jdm clock
•jdm center console
•lots more of jdm parts
-oem hood
-oem fender
-complete GSR front brake system
-lot more engine parts to list...
call or text @ 702-481-0114
email: jdmrobby@yahoo.com
11sec All-Motor
fully built by LDL speedshop
B16a Head
B18c Block
Stroker Kit (92 mm)
-Sleeve Block-Bore n Hone
-92 mm Crankshaft, Lightened and Balanced
-1 set Endyn Pistons (Custom for 92 mm Crankshaft)
-1 set Pauter Rods (Custom for 92 mm Crankshaft)
-1 Custom Head Gasket
-1 set ARP Head Studs
Port/Polish Cylinder Head
-3 Angle Valve Job
-Replace Valve Guides with Bronze
-Brand new OE Valve Stem Seals
-Wash and Re-Surface
Open up Combustion Chamber
-Match to 85 mm Block
Match Port Intake Manifold
-Victor X intake manifold
Parts:
Valve Train Kit
-1 set Skunk2 Stage 3 Cams, Portflow Springs and Retainers, Skunk 2 Cam Gears
Type R transmission LSD w/ final gear
ACT extreme clutch
9lb lightend flywheel ACT
DTR six sigma headers with Megaphone
Hasport Mounts (Race)
B & M Fuel Pressure Regulator
B & M Fuel Pressure Gauge
Walbro Fuel Pump
440 cc Injectors
72/70 Throttle Body
Hondata S300
Brand New Distributor
CTR Pulley
Suspenssion:
-Tokico Struts
-Skunk2 Drag Launchers
Exterior:
-Carbonfiber Hood
-JDM wing (long led light)
-Rota Wheels (not on pic)
•engine work and power train parts alone cost over $10k
•only have 1500 miles on the power train and only 6 passes in the track
•Mustang Dyno 264whp and 185lbs of torque
•best 1/4 mile time: 11.8secs (with interior)
•fully built and tuned by LDL speedshop
* asking price $8,000 obo
* for $10k you can take the car and all the Honda parts in my garage!
-GSR tranny
-B16a head (complete)
-(2) S2000 seats (black)
-Bogarts (all 4rims with slicks)
-4more set of slicks
-JDM parts for EG
•jdm headlight
•jdm fog lights
•side markers
•jdm vin plate
•jdm clock
•jdm center console
•lots more of jdm parts
-oem hood
-oem fender
-complete GSR front brake system
-lot more engine parts to list...
call or text @ 702-481-0114
email: jdmrobby@yahoo.com
Last edited by jdmrobby; Jan 22, 2013 at 11:18 AM.
