AL 2000 Acura Integra GSR
2000 Acura Integra GSR
122,860 miles on the body motor was rebuilt at approx 95,000 miles
Black ext/ Black interior
Motor was rebuilt with Wiseco 11:1 compression pistons
Eagle Rods
ACL bearings
Top End was rebuilt with all new seals
Cometic headgasket
JDM Type R Valve Cover
Skunk2 Intake Maniford
Short Ram intake
Competition Clutch Stage 2 Clutch and Pressure Plate
Fidanza lightweight 7.5LB flywheel
Hytech Replica header to 2.5in high flow cat to 2.5in Greddy Exhaust
Tein Super Street Full Coilover suspension
Skunk2 short shifter and weighted throw ****
Alpine Headunit with integrated iPod connector
Motor was tuned by Import Cars Stamford (ICS) in Connecticut
Tuning was done on a Hondtata S100 tuning unit, has a Hondata OBD1 ECU
$5500 obo
Contact by email Cuda472@aol.com or text 203-536-1689 am open to any questions regarding the car, or any pictures that you would need. NO TRADES cash talks
122,860 miles on the body motor was rebuilt at approx 95,000 miles
Black ext/ Black interior
Motor was rebuilt with Wiseco 11:1 compression pistons
Eagle Rods
ACL bearings
Top End was rebuilt with all new seals
Cometic headgasket
JDM Type R Valve Cover
Skunk2 Intake Maniford
Short Ram intake
Competition Clutch Stage 2 Clutch and Pressure Plate
Fidanza lightweight 7.5LB flywheel
Hytech Replica header to 2.5in high flow cat to 2.5in Greddy Exhaust
Tein Super Street Full Coilover suspension
Skunk2 short shifter and weighted throw ****
Alpine Headunit with integrated iPod connector
Motor was tuned by Import Cars Stamford (ICS) in Connecticut
Tuning was done on a Hondtata S100 tuning unit, has a Hondata OBD1 ECU
$5500 obo
Contact by email Cuda472@aol.com or text 203-536-1689 am open to any questions regarding the car, or any pictures that you would need. NO TRADES cash talks
Last edited by Cuda4722; Feb 25, 2013 at 06:18 AM. Reason: Car was sold
I dont have a dyno chart (it was on my old laptop when it died), and it was tuned ~4 years ago, but I recall it made 192 peak whp. That is with only the bottom end being worked, my original plans for the car were never able to pan out.
Trending Topics
No the car is in north Alabama, the front is slightly off due to what I suspect is an aftermarket bumper that I purchased to replace the original , yes the title is clear no front end accident just the plastic bumper was damaged by road debris
NO TRADES, and if I misquote the mileage that I have posted on this page when you text me I'm sorry but I put it up here with an attached picture so that I wouldnt have to remember the exact mileage. Please read the posting and only ask questions where the information is NOT posted here its annoying to keep getting the same "How many miles does it have" over and over again
Correct me if I'm wrong.. seems a little too high of a price for me! I mean I'm not there to see it in person but the interior looks very dirty, the outside doesn't look as straight as it should, and looks like its missing the side plastic guards. I would say give it a good car wash, vacuum the inside, and make it look pretty. IMO.. but good luck on the sale.
Correct me if I'm wrong.. seems a little too high of a price for me! I mean I'm not there to see it in person but the interior looks very dirty, the outside doesn't look as straight as it should, and looks like its missing the side plastic guards. I would say give it a good car wash, vacuum the inside, and make it look pretty. IMO.. but good luck on the sale.
And yes unfortunately the lighting that day did a poor job of showing the exterior paint. As well as the interior looking dirty, I know that this is a poor way to represent my car but I was limited in my time to take it out to wash it and try to get it vacuumed and cleaned before another rain storm moved in. It had been raining for a week straight and this was my first opportunity in quite a while to get any work done on it, more pictures can be sent upon request.
Again my price reflects the money that was put into a high quallity engine build using HIGH QUALITY aftermarket parts. These are not your cheap $200 RS pistons and bearings, I build this motor to last and to perform. If you feel that my price is on the high side feel free to send me an offer. The price is OBO for a reason
To anyone looking at the car, if you have cash in hand ready to buy not in a month after a few pay checks you will have a much better position to negotiate the price. I have had 4 people flake on me to see the car.
I am currently a 3-4 hour drive away from the vehicle for work so unless you are very very serious about buying please do not ask to see the car. Anyone who is serious I am more than willing to work with you on seeing/test driving/haggling on price
I am currently a 3-4 hour drive away from the vehicle for work so unless you are very very serious about buying please do not ask to see the car. Anyone who is serious I am more than willing to work with you on seeing/test driving/haggling on price
The interior has been clean for quite some time I just dont have any good pictures of it that I can put up, only have my smartphone camera. Car is 4 hours away so I cant upload any better or more recent pictures which I desperately need to do. Need to get away from work for a weekend and get that taken care of


