NEW GARALE SALE NEW SH!T JRSC, PROFAB header, K24A2,J's exhaust, CWEST, CTR, & MO

Closed Thread Subscribe

Thread Tools

Search this Thread

Nov 26, 2012 | 06:11 PM

88crxsir

Thread Starter

Honda-Tech Member

iTrader: (2)

Joined: Oct 2003

Posts: 5,539

Likes: 0

From: J D M, CA, usa

NEW GARALE SALE **NEW ****** JRSC, PROFAB header, K24A2,J's exhaust, CWEST, CTR, & MO

First up is my wife's Jackson Racing Super Charger (M62) for GSR. we have decided not to use this since we just had another baby & have no time to mess w/ the car. so here it is.

I Picked this up early last year & it was in need of some TLC, it's in perfect working condition w/ NO SHAFT PLAY!!! anyone who knows me, knows i don't do anything halfass or take short cuts. my wife's DC2 is too clean for me to just slap anything on it w/o being pimped out first!
i have fully reconditioned/restored this setup down to every single bolt as well as ordering new parts for the kit from moss motors like gaskets, recharge kit, brackets, pulleys, etc. ALSO, i had the upper manifold hot tanked!!
not only did i rebuild the kit, but i also planned to run this proper & to the fullest! i have done all the researching for what i planned for this setup & it's all here!! this is complete & all parts for the upgrade minus a few things. I WILL POST UP EVERYTHING EVEN THE SITE w/ ALL THE INFO YOU NEED TO GET STARTED IN THE RIGHT DIRECTION!!!

JRSC M62 GSR KIT- our plan was to run this setup near max boost!! stock for this is 6psi, w/ the pulleys we have for it now will put it at 10.3psi!!!
you can check on this site for all your info & questions!!! if you plan to track or drag on this higher setup you might wanna think about getting the LHT intercooled kit w/ this. thats if your INT temps are gonna exceed 180F. again you gotta figure that out based on what you plan to do w/ this kit!
************************************************** ******************
ALL THE INFO YOU WILL NEED!!!!! IT'S ALL HERE!!
http://ftlracing.com/supercharger.htm

http://ftlracing.com/tech.htm

http://store.kteller.com/ktell....aspx

http://www.lhtperformance.net/....html

KIT WILL COME COMPLETE w/ Brand New RC 440 injectors, recharge kit, LS stepped pulley. ** i do have the old belts for this kit but you will need to get new ones if you stick w/ this specific setup. all belt part#'s are listed on the site above for each specific setup!!

PRICE: $1500 COMPLETE w/ eveything i have, OR $1300 w/o injectors
PICS FROM TODAY:

OLDER PICS OF THE REBUID

J's Racing 60MM RS exhaust system for DC5
overall in good condition, few minor scuffs along the bottom & slight flat spot on the B-pipe. DOES NOT affect the performance on bit!! ONLY reason im selling is cuz i wrecked my rsx & don't feel like trying to modify the muffler to use on another car.
PRICE: $850
PICS:

OG PROFAB HEADER, this off my homie ATS*RON's eg, hard to find one these days!
PRICE: $600
PICS: older pics, but it's in the same condtion, no major flaws. still on the car though. will be off the car next month.

04' TSX K2A2 longblock 70k miles!! this motor was out of an automatic so you know it wasn't abused!
it was a warranty replacement motor from ACURA, some older lady's TSX. from what i was told the motor just bent a valve. no damage to anything else. not sure why they decided to replace the whole motor, but it was fully inspected & built by Rcrew. i have a friend who will vouch for this motor being built as well as a bill of sale with it & legit VIN plate is in tact-# JH4CL96944C009754
CHECK FOR YOURSELF, JUST ENTER THE VIN.
http://www.nicb.org/theft_and...check
****TRADES WELCOME!!!!!!!!!!!!!!***********
I spent $4k for all of this!

04' k24A2 longblock......$2000

NEW k20a oil pump/modified.....$150
part# 15100-PRB-A01 retail price:$186

NEW Blox valves & valve job....$400
part#BXPT-20202-3 retail price:$256
assembly.....................$250

NEW acura OEM headgasket.....$100
part#
NEW ARP headstuds..............$150
part#208-4701 retail price:$163

NEW Rcrew stage2 camshafts & springs/retainers......$900
part#212-HO5-112 #214-H05-030 #213-HO5-050 retail package price:$1200

Shaved/coated valve cover...................$100
TOTAL COST ON THIS MOTOR: $4000
* keep in mind all the parts were slightly discounted prices!

MY SELLING PRICE: $3000 PICKUP ONLY!!

HAD THIS FOR MY BACK UP BUMPER BUT DON'T NEED IT ANYMORE, THIS WAS OFF RYAN's( airbag club) EK. I BOUGHT HIS KIT BUT IM JUST SELLING THE FRONT BUMPER ONLY!!! comes w/ quick release bumper twist locks
PREFER PICK!
PRICE: $375, shipping would be at buyers expense if i decide to ship!
will post more pics tomorro, but i had it painted Championship White w/ the whole kit & never installed it!!! also left the holes along the bottom open so you can run ARC winglets if you want :bang: