H22 head rebuilt, kms bronze guides, springs, retainers, flat valves, new seals minty $sold
H22A block JDM has scratch on one cylinder. happens while i was manually spinning motor over, very very light can hardly see it can go to 87.25 with no problem. clean block bearing were great shape. i think something fell in cylinder while it was stored in my shop b/c i had spun it over multiple times before wit no sratch and the day i was going to install head i spun it over and magically a scratch appeared. $100 bare you pay actual shipping cost need zip to figure cost
H22 aluminum oil pan with trans bracket $75 shipped
H22 valve cover stripped ready for paint $sold
arp head studs bnib $sold
kaizenspeed balance shaft eliminator for h22a4 and h22a1(bought extra plug for h22a so will work with both blocks) $sold
kaizenspeed tensioner $sold
nippon racing H22 jdm type s pistons 87.25mm with rings $sold
crower stage1 cams (work with oem springs) $sold
speed factory thermal gasket mounted but never ran $sold
H22 vtec solenoid $sold
H22 distributor w/external coil with VMS plug wires that are new $sold
oem h22a4 cams $40 shipped
timing plastics in good shape $30 shipped
H22 half shaft $60 shipped
jdm crank pully in good shape no chips $30 shipped
h22 water pump in good shape $sold
oil pump of jdm h22 in good shape $40 shipped
H22A4 rods $40 shipped
H22A4 crank in good shape no marks $sold
H22A4 intake manifold $40 shipped
JDM H22 trans prob need some work. i removed the diff for a accord trans b/c i planned on installing lsd and caron synchros. never ran it so idk if had any grinds or pop outs. can get pics of whatever you need if want to see inside it. $100 you pay actual shipping rates need zip to check

have all kinds of engine brackets, alt brackets etc. basically two blocks that were tore down and stored was keeping in case i needed small stuff when i rebuilt the H22. lmk if you need/see anything in pics you need. need this stuff gone and will work on prices. would rather go somewhere it will be used instead of sitting in my shop.

 

mo pics

 

Npknight22@hotmail.com interested in all parts email me for cell number

 

pm'd

 

Can I drop pistons right in h23 block?

 

no they are not factory size. needs to be taken to 87.25mm, can be done on factory frm cylinder though.

 

seems no one interested in H22's anymore, maybe i will just finish the motor and save in case my accord needs it in the future.

 

Fresh *** H parts, good guy to deal with bought and sold lots of parts and cars.

 

thx maine

 

I have an f22b2 in my 91 accord, and I'm very new to the game. If I'm not mistaken some of these parts are interchangeable. If so let me know and I would probably be interested

 

can put the head on the f22 and have a g22 dohc vtec, idk research im not to knowledgable on using h22 stuff on f22's

 

headstuds, water pump sold

 

anyone that wants more info on head packge can be found on KMS's website

http://www.honda-performance.com/

 

distributor/plug wires/spark plug cover sold

 

ttt, throw me some offers, need this stuff gone

 

ttt

 

$150 shipped for the Kaizen Speed BS Elim and Tensioner

Real money ready to send if you are interested PM me

Thanks

Also, I wish I had the money for the head, I will need it come May

 

pm'd

 

hey man you should text 254 383 5651 i have a few questions

 

hey man you should return texts.

 

bump for sold item

 

will be shipped tomorrow

 

All parts shipped

 

The h22a4 manifold complete with fuel rail and tb?

 

no but i will take but $30 its yours