Rules
1. No "bumping", it's a sticky so it's always at the top.
2. If you need to contact a member send them a PM, do not post comments/questions in this thread.
3. 1 post for your parts for sale, do not post multiple times for the same parts.

Please update your listing if something is sold or you no longer need something you wanted to buy.

 

Good day all,

NM I found what I was looking for!

Thank you!

 

Looking for a DRIVER SIDE FENDER in Heather Mist Metallic for my 98 Accord. I will pay for shipping!

 

I have a few items i don't need and could use the money.
Up for sale i have make offers
a stock f22b1 header


throttle body


FIT Valve


no name intake


2 OEM Oil Caps


1 Sunroof/cruise switch, 2 rear defroster switches , 1 dimmer switch, 2 Empty spot caps


Lighter


Door light covers & 1 Trunk Light Cover


stock brake master cyl from the Jy (from an EX)


Panasonic super tuner 3 headunit # deh-2300


Roof Handle Scew Covers


2 Windshield Washer Nozzles



2 brand new unused sets of Tenzo R rear lowering springs no fronts, Which i believe lower the car about 2 & 1/2in. for 90-97 accords. obo



here's a pic kuya sent me a while back of his old car on these same Tenzo springs




M3 Style trunk lip spoiler (silver) 20$

 

Selling a brand new set of EBC PART# UPR624 premium replacement front 11.1 " rotors.

New these are 76.xx a piece, literally only took the one of the box to take pictures. ( http://ebcrotors.com/p-222-ebc-stock...riantID=136107 )

Change of plans on my accord so no longer need these. Please verify your application if interested.

SOLD!

 

I'll try to keep this post updated. Most of this stuff I'm not trying to get much for, just cleaning out and helping out if you need something so send me offers.

I'm also parting out this 95 Auto EX here


And the aftermarket parts from this car to take it back to stock here


New parts:
DC integra fog switch (vertical) with pigtail: $35 + shipping
DC integra fog switch (vertical) no pigtail: $20 + shipping (pigtail on ebay for $15 right now, 5 available)
http://www.ebay.com/itm/JDM-94-01-In...924444&vxp=mtr
OEM Accord fog switch with pigtail: $25 + shipping


Hondata s200 BNIB with Boost and Datalogging options. Comes with everything pictured: $200+ shipping

s200 Interface Box and ECU cable
6' Serial cable
Hondata sticker
Clutch Switch Cable
Set Button
ECU Hardware
-Eeprom
-DIP Socket
-Resistors
-Latch Chip
-Scotchlok Connectors
Instructions for clutch switch setup and setting rev limit




Greddy oil sandwich adaptor. You will need an O-ring: $20 + shipping


ARP H23 Head studs (used): $75 + shipping


JDM H22 Dizzy? (can somebody identify?)


H22a4 Alternator Bracket $20 + shipping


H22 PS bracket? (can anyone confirm?) $20 + shipping


38mm wastegate valve seat, used: Free + shipping


Hiper/Hyper water temp gauge: $10 + shipping.



F22Ax turbo manifold "mini tubular?": $75 + shipping



1993 accord LX fuel injectors (at least one O-ring needs to be replaced): free + shipping

F22A1 intake manifold and TB: $50 + shipping



OEM 94-97 accord sunroof visor $40 + shipping but would prefer local cause it's long/fragile



Partially cleared 94-95 tails: $10 + shipping
A friend was clearing these for me but never finished. Good for a spare set so you can take your time and not worry about screwing your other set up?

 

F22B2 Non-vtec Engine Part out

The driver's side mount bracket bolt holes (on block) broke off and cost more to fix than I want to. So I'm parting out what I have to get some of my money back for it. It was a from a 140-150K mile Accord, and here is what I have:

-Head w/o cam or valve cover $55 + Shipping
-Head with cam/valve cover $80 + Shipping
-Valve Cover $40 Shipped (still looks good)
-Cam/cam gear $30 Shipped
-Crankshaft $60 + Shipping
-Main Cap/Bridge $25 + Shipping
-Main Bolts $20 shipped
-Head Bolts $28 shipped
-Auto Flex Plate/bolts $15 + Shipping
-Pistons/Rods (all four) $45 Shipped

Picture upon request. All prices are OBO, and all parts are still on the engine and only will be removed if you are very interested (I can still return the engine for some credit, unless it's been taken apart).

 

clutch masters 12lb. aluminum flywheel BNIB 280 obo. make an offer need gone. text me 401 654 8804

 

looking for one. msg me

 

for sale 92-93 accord jdm fog lights. comes with fog lights, brackets, partial harness, switch, everything in the pic pretty much, id have to say they are pretty clean, if not mint. 225 plus shipping, OBO!


also some side markers. believed to be accord.
50 shipped



will work deal on these and fogs if bought together.

 

Mostly 90-93 Accord JDM/EDM parts







92-93 JDM/EDM 2PC GLASS HEADLIGHTS **VIRGIN** as far as im concerned not even ebay has had a set for a long while now. also i have not seen a set on here unmodded for a while. (comes with clear 1bulb stanley corners, bulbs.) BEST OFFERS



<How they look fitted on
90-91 JDM 1PC HEADLIGHTS **VIRGIN** also i have not seen a set on here unmodded for a while. (rubber rear boots all included, stock halogen h4 bulbs included) BEST OFFERS




ALL STUDS INTACT NO RIPS TEARS OR GOUGES, PAINT HAS BEEN MOSTLY REMOVED PAINSTAKINGLY BY HAND BY ME.BEST OFFERS ONLY ( OR I WILL IGNORE YOU)


minty 90-91 fogs 175-
complete with rubber grommets, brackets,bulbs and newly refinished lenses. 1 pair still avail!!!


ALB (anti lock brakes emblem off a canadian accord. EX-R EMBLEM NOT AVAIL!) 10



EX PT3 ECU 40


pass side engine mount (auto) 25


accord tan head rests 25


HONDA Crank Pulley Holder Tool 40


passenger front window regulator 40
door lock mechanism 30
top sail piece for pass frontdoor 10
front and rear door handle in cobaltblue 20


oem cd changer 70-


Rare oem equalizer 40




Vafc 120-


fuse box 30

passenger coupe door handle (blue) 35


i forget what these come out of but they fit right into the stock cb seats grey in colour. just needs a little clean. 35




REAL ITR H emblem NIB 70-
i have one for a DC2R still in the packaging. bought it straight from AJ-RACING in vancouver canada 70 shipped. oem honda single emblem.


2 hid bulbs for h3 its 6000k never been used. i decided to go with a h4 and use my hids for my headlights instead of fogs so these are up for grabs.. 25-


aftermarket radio harness 90+6-




MOMO ITR HORN BUTTON COMES WITH HORN ADAPTER TO FIT IN ANY RACING WHEEL100.


stalk boots (1 set still avail) 10 [COLOR="Red"][B][SIZE="3"]


map sensor 35


NGK WIRE SET for accord/prelude with F22 engines 45 shipped


NIB exhaust 0 - ring gaskets 12- for both


1 lower balljoint castle nut NIB 5 EA shipped


Hand made custom egr blockoff plate. 20


2 authentic jdm plates. (comes with jdm dirt still attatched ) not to be confused with the illuminated plate i have on my own car. these dont have the clear green acrylic numbers.
60 each




JDM SPATS SPORTS front strut bar cd5/cb7 165 obo shipped




jdm headlight rubber seal one left!12each.




mint jeco dc2 clock out of my coupe 25 shipped




corbeau universal seat slides. BEST OFFERS




misc rare and not rare switches / blockoff plates.

contents:
1 defrost switch 5
1 hazard switch 5
2 heated seat switches one without pigtail (30 for one with pigtail) 15 for one without
1 corner sensor switch 15
1 heated mirror switch with both pigtails 30
1 gaslid lever 5
1 armrest blockoff plate blue 5
1 armrest blockoff plate tan 5



1 bb6 foglight switch 15


1 ex emblem 5


hippo sleek amber lenses attatch to your existing corners to make them look like ambers. comes with jdm literature and original hippo sleek box. BEST OFFER




JDM ILLUMINATED PLATE AND BOX 275 shipped comes with light box bulbs, and a plate some wiring...


INSIGHT DRL module 100


Middle H22 timing belt cover 40-


EDM REAR FOGLIGHT 160


30shipped comes all complete. (screws,brackets,holders,lense,pigtails,sockets bulbs)

LOWBALLERS WILL BE IGNORED PM ME TO MAKE SURE THESE PRICES ARE FOR SHIPPED!!

 

Hello,

Looking for stage 2 ALL MOTOR CAMS and a good exhaust header. Any sellers?

Regards

 

JDM M2B4 LSD transmission for sale in Socal. PM me for more information

 

Up for sale is parts off of a CD7 Honda accord (1994-1997)...all parts are in good working condition...
IF INTERESTED CALL ME 310-982-3018
NO LOWBALLERS

First is a RSR Exmag exhaust...this exhaust is pretty hard to come by nowadays and is discontinued..complete with all piping and hardware...muffler is in mint condition...no dents, scrapes or imperfections on it...retailed for about $800 when it was new...
Price: $275 OBO picked up...shipping is expensive and of course it is extra...




Next is a complete set of tokico blues with eibach sportlines...NOT BLOWN OR LEAKING....good working condition...part numbers provided in the pix
Price: $175 picked up OBO



Last is a pair of Suspension Technique (ST) sway bars...these really made the car feel rigid and very solid...car handled very good with these installed...complete with everything necessary to install..i spent around $400 for both bars when they were new..part numbers provided in the pix
Price: $250 for both

 

94-97 JDM Accord SIR km/h cluster

Direct swap in...plug and play into ANY 94-97 accord. Manual/automatic, doesnt matter...ANY!!!

Plastic front cover has a few typical scratches...bubble in the fuel guage. You can always swap out the fuel guage with your current usdm one if it bothers you. Takes all of 5 min to do.

$60

local pickup in portland/vancouver metro area

or

PM me your zip code for a shipping quote.

 

basically new turbo kit - 75% of the parts are new

STR cast manifold - t3 flange/38mm wg flange
t3/t04e 57 trim ebay with stage 3 wheel
KMS engine dev oil feed plate w restrictor for t3/t4 -4 fitting
KMS engine dev oil return plate w/ -10 fitting
42" -4 oil feed line
glow shift oil plate with fitting for oil feed -4, and oil pressure gauge fittings --
already installed and ready to go
XS POWER 10 psi wg - used previously and this one worked great - with fire ring
greddy knock off bov
3" cold piping couplers and t bolt clamps
2" hot piping with couplers n t bolt clamps
3" to 2" turbonetics reducer on intercooler
31"x12"x3.5" fmic with 3" in/out -brackets made for my cd7 - ready to install!!
3" downpipe with flanges (used) - was on old setup. will need cut up n welded back together since this turbo is clocked differently than the previous one.
vortech 12:1 fmu
synapse missing link
- 10 line from turbo to oil pan and -10 steel weld bung. line is already professionally assembled. all braided lines were assembled professionally.

this kit is basically ready to install. i was gonna install it and try to sell the car with it but ima try n sell everything seperate(turbo kit n car)
NOT PARTING TURBO KIT SO DO NOT ASK

if you peiced it together this would run u 800-950
I WILL SELL THIS ALL FOR $700 OBO cash is king. local is better!!!
if you are local i will install this for you for $150 out the door. i am literally making ZERO DOLLARS ON THIS ONE GUYS. just need some scratch right now and beliewve me THIS HURTS ME REALLY BAD TO DO THIS SO PLEASE DONT BUST MY *****





















Enough pics!!!! lol

412-861-1996 Alfredo
im in southwest PA 5 minutes from morgantown wv West Virginia University... i will drive to meet someone if they are driving too.

 

 

i need tps for h22a1

 

Edit: Transmission replaced with a rebuilt unit: bye bye $1700.(which is actually a really good deal, I received quotes as high as $2900 for an installed rebuild. Tech-Auto in Chantilly is where I had the work done and one tank of gas later I'm happy with it.)

 

Got a 94-97 Accord Tow Hitch. Made By Curt. Like New Used It once. PM me if your Intrested. Every 5 speed accord Should have one Mine Towed Awesome.

 

still looking for COP connectors?

 

Sorry should have updated my post. Thanks for the offer, I have already found a set local though.

 

9546045922 for quickest response

T2w4 factory lsd tranny NO grinds or 5th gear/reverse issues.$800
Euro R factory ported and polished pde cylinder head complete with Cams..sold
Shortblock stock 11:1 compression no spun bearings mechanical problems ..$450
Euro r intake manifold..sold
Hseries ek swap mounts sold
intermediate shaft $100
chipped p28 ecu $120
Obd2b internal coil h22 dizzy $80
Obd2a b20 dizzy $50
Obd1 vtec bseries dizzy $60
Shift cables $100
S2000 ap2 Cluster $250
Ek coupe 3” mandrel bent bolt on exhaust with 14” resonator $200
H22 header with working o2 sensor.a bit of surface rust, not crazy just worth mention.
H22 six puck sprung clutch and pressure plate good life left. $75
H22 12lb flywheel $100
euro r single row crank pulley $75
half size rad with 12" fan $50








[/B]

 

I need any f series manual tranny! My 91 accord stuck in 2nd gear! Willing to pick it up anywhere in SoCal! PM me if you have one

 

Car is a 95 accord ex, red 5 speed.
Motor is an f22b1.
I have a DC ceramic coated header and down pipe, some scrapes- 200 shipped.
Pm me for pictures