B18C1 head ported/polished (Jax)
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 158
Likes: 0
From: Northeast FL, USmuthafknA
B18C1 head ported/polished (Jax)
**SOLD**
Original B18C1 head from my 97 Integra GSR.
Head work performed by Alaniz (Alaniz logo and serial # of my job stamped into head)
Alaniz "Competition" package -- ported, polished, combustion chambers opened up a bit to better mate with the 84.5mm bore of my block, Alaniz valve springs/retainers, stock GSR valves
AEM adjustable cam gears & stock GSR valves/camshafts
VTEC solenoid still attached
$575 for head with valves/valve springs/retainers installed
$625 if I include the cams and adjustable cam gears
Face-to-face, cash in Jacksonville preferred. Shipping this will cost some serious coin.
Original B18C1 head from my 97 Integra GSR.
Head work performed by Alaniz (Alaniz logo and serial # of my job stamped into head)
Alaniz "Competition" package -- ported, polished, combustion chambers opened up a bit to better mate with the 84.5mm bore of my block, Alaniz valve springs/retainers, stock GSR valves
AEM adjustable cam gears & stock GSR valves/camshafts
VTEC solenoid still attached
$575 for head with valves/valve springs/retainers installed
$625 if I include the cams and adjustable cam gears
Face-to-face, cash in Jacksonville preferred. Shipping this will cost some serious coin.
Last edited by DeltaCharlie2; Sep 28, 2012 at 02:57 PM. Reason: SOLD
Re: B18C1 head ported/polished (Jax)
Thread
Thread Starter
Forum
Replies
Last Post
iH8RICERZ
All Motor / Naturally Aspirated
31
Nov 9, 2005 07:54 PM
