i have a 2011 Accord V6 Coupe. I want to get a set of rims and tires but I'm not to confident in picking an offset and everything else thats involved. Could someone share some knowledge and assist me in picking a set. thank you

 

We already have a significant knowledgebase for the terminology used when looking at wheels and tires in the FAQ's: https://honda-tech.com/forums/wheel-tire-56/9658-forum-rules-faq-read-before-posting-1188922/

As for your specific car, you may want to mention what goals you have for the car. Is it going to be a street-only car, are you going for a "low offset" trendy look or a performance setup, is the car lowered, are you willing to do modifications to increase wheel/tire clearance...

Please be more specific when asking questions here.

 

poke, sunk, tucked, track, conservative, big, traditional. gotta throw us a bone here.

are you just wanting to put some 22"s on your accord? or did you get stuck with an oem steel wheel and find it ugly?

are you lowering the car, and then how low are you going to go? are you going to lower it at all?

pick a diameter. everything else will have to be determined from here.

 

the car is lowered 2", its my daily driver. no i dont want to just throw a 22 on it. i will check out the link the you sent. i wanted to do an 18" in the front and 20" in the back.

 

Why are you wanting a 2" stagger on the car? Its a FWD car, so I can't see the reasoning behind putting a taller wheel in the back. Especially not a 2" stagger.

 

90% chance your abs/tcs/etc will HATE this. and there-by cause you to hate your wheels equally as much.

 

i've googled a ton of imagines and alot of people are running a stagger on them.

 

I didn't find any.

I did find this, though. Its pretty sharp.