FS:Turbo, RC Injectors, Skunk2 Pro1 Cams
Thread Starter
Honda-Tech Member
Joined: Jan 2007
Posts: 24
Likes: 0
From: Villa Rica, GA, USA
FS:Full Race, Master Power, RC, Skunk2, ECU, Boost ctr, ACT
All parts are for a b-series. (except turbo)
Turbo has been on my car for 2 years but car was in the shop for electrical problems for one year of that time. I've probably put 4 tanks of gas through the car with this turbo. Never tracked and rarely beat on. Made 390 @ 16#. Ran it at 12# most of the time. No smoke, no shaft play. .70a/r compressor .63 hotside 61 Trim. Cost a little over $900 new. I realize a lot of people have never heard of this turbo but you can read all about it here. http://www.odonnellmotorsport.com/prod31.htm
World Electronics Boost Controller. You can read about it here http://www.world-motorsports.com/pbc1.php and you can see what I paid for it here http://www.world-racing.com/store.htm It comes with controller, wiring and solenoid. Has worked perfectly for me for 4 years.
Turbo=$325
Used B16 ACT AI4-XDSS Xtream Duty Pressure Plate and Street Solid disc Torque: 320 (ft/.lbs) (pics coming soon)=$180
World Electronics Boost Controller=$175
S2 P1 Cams=SOLD
Chipped p72 ecu = SOLD
T3 Full Race Ramhorn a/c compatible 44mm vband wg=SOLD
Skunk 2 Pro Series Intake Manifold B16=SOLD
RC Injectors=SOLD
GSR Cams=SOLD
Shoot me an offer, the worst i can say is no.
Turbo has been on my car for 2 years but car was in the shop for electrical problems for one year of that time. I've probably put 4 tanks of gas through the car with this turbo. Never tracked and rarely beat on. Made 390 @ 16#. Ran it at 12# most of the time. No smoke, no shaft play. .70a/r compressor .63 hotside 61 Trim. Cost a little over $900 new. I realize a lot of people have never heard of this turbo but you can read all about it here. http://www.odonnellmotorsport.com/prod31.htm
World Electronics Boost Controller. You can read about it here http://www.world-motorsports.com/pbc1.php and you can see what I paid for it here http://www.world-racing.com/store.htm It comes with controller, wiring and solenoid. Has worked perfectly for me for 4 years.
Turbo=$325
Used B16 ACT AI4-XDSS Xtream Duty Pressure Plate and Street Solid disc Torque: 320 (ft/.lbs) (pics coming soon)=$180
World Electronics Boost Controller=$175
S2 P1 Cams=SOLD
Chipped p72 ecu = SOLD
T3 Full Race Ramhorn a/c compatible 44mm vband wg=SOLD
Skunk 2 Pro Series Intake Manifold B16=SOLD
RC Injectors=SOLD
GSR Cams=SOLD
Shoot me an offer, the worst i can say is no.
Last edited by donkeyparfait; Nov 17, 2012 at 05:06 AM. Reason: price update
Thread Starter
Honda-Tech Member
Joined: Jan 2007
Posts: 24
Likes: 0
From: Villa Rica, GA, USA
Re: FS:Turbo, RC Injectors, Skunk2 Pro1 Cams
Dyno with Masterpower turbo, Full Race ramhorn T3 mani, GSR cams, B16 head, sleeved b18b block.
Last edited by donkeyparfait; Oct 2, 2012 at 06:27 PM.
Trending Topics
Re: FS:Turbo, RC Injectors, Skunk2 Pro1 Cams
Are the Rc high impedance? Just plug and play no resistor box required?
Will you take $200 inc shipping to UK? Won't be a big or heavy package and if you declare them as $20 items to save on import charges?
Will you take $200 inc shipping to UK? Won't be a big or heavy package and if you declare them as $20 items to save on import charges?
Thread Starter
Honda-Tech Member
Joined: Jan 2007
Posts: 24
Likes: 0
From: Villa Rica, GA, USA
Re: FS:Turbo, RC Injectors, Skunk2 Pro1 Cams
They are the SL4-750. According to the information i found online they are High Resistance (Approx. 12/16 OHMS) Saturated Fuel Injectors.