WTB:97 acura integra GSR OBD-2 CABIN HARNESS
Trending Topics
Joined: Apr 2002
Posts: 1,548
Likes: 0
From: got boost, michigan, usa
Re: WTB:97 acura integra GSR OBD-2 CABIN HARNESS
Is there any differences between the gsr and ls? I know the VTEC wire.....but some civics cabin harness were wired all the same.....I have a full uncut cabin harness but it ls
Re: WTB:97 acura integra GSR OBD-2 CABIN HARNESS
It wont work due to the vtec wires but i can look in my book and see what plug and wire color it is and tell you so you can look to see if it is there.
Joined: Apr 2002
Posts: 1,548
Likes: 0
From: got boost, michigan, usa
Re: WTB:97 acura integra GSR OBD-2 CABIN HARNESS
Sounds good.....I know on some obd1 civics it was an orange wire....but not sure on tegs...
I was wrong on one thing ....original owner had an alarm with starter kill....so the wires for the ignition had been cut/ spliced into alarm....I will repair those if the harness will work...lmk....
I was wrong on one thing ....original owner had an alarm with starter kill....so the wires for the ignition had been cut/ spliced into alarm....I will repair those if the harness will work...lmk....
Honda-Tech Member
Joined: Jul 2009
Posts: 124
Likes: 1
From: Cen Cal
Re: WTB:97 acura integra GSR OBD-2 CABIN HARNESS
It works, just wire it up for vtec, not very hard. Shame for me, I have.a complete uncut cabin harness from my 2000 GSR. Which wont work in my 97 LS