FS - B16 Endyn Ported Cylinder Header, TWM 52mm, DDTech M24XX's, Supertech/Eagle
Thread Starter
Joined: Dec 2005
Posts: 4,254
Likes: 8
From: Independence, MO, USA
FS - B16 Endyn Ported Cylinder Header, TWM 52mm, DDTech M24XX's, Supertech/Eagle
Lost all interest in completing my project, so its going to be parted out and I'm moving on.
Comes with their "full port" service #2. CNC'd w/hand finishing. chambers have been opened up to 85mm, since the engine was 85mm. This is an All Motor/NA port job, dont know how well it'll perform on a boosted application.
Fully assembled, has supertech springs, retainers, STD size flat valves, new style bee hive (oem direct replacement) LMA's. Extended intake studs. Vented valve cover. $1700 + shipping
http://theoldone.com/components/cyli...r_head_mod.htm
TWM 52MM ITB's. Horns are powdercoated a dark purple, less than stellar PC job. Rail is modified for Left hand feed. Fitting is welded, does not leak. Cap on other end tapped for fuel pressure gauge (current one is broken, reads 20psi all the time). Will come complete with fuel lines, gauge, vibrant vacuum manifold, OE honda MAP & IAT w/pigtails, TWM TPS w/pig tail. $1200 + shipping
DDtech "rocket motorsports" M24XX's w/GE gears (will not separate) $700 + shipping
M24xx Intake .488/272 Exhaust .472/262
OPEN 28 BTDC; CLOSE 53 ABDC -Intake
OPEN 61 BBDC; CLOSE 21 ATDC -Exhaust
Supertech 12.5:1 85mm pistons on Eagle Rods (will not separate) - $450 + shipping
Prices are firm, no trades, cash only. Pickup preferred, but willing to ship on your dime.
Comes with their "full port" service #2. CNC'd w/hand finishing. chambers have been opened up to 85mm, since the engine was 85mm. This is an All Motor/NA port job, dont know how well it'll perform on a boosted application.
Fully assembled, has supertech springs, retainers, STD size flat valves, new style bee hive (oem direct replacement) LMA's. Extended intake studs. Vented valve cover. $1700 + shipping
http://theoldone.com/components/cyli...r_head_mod.htm
TWM 52MM ITB's. Horns are powdercoated a dark purple, less than stellar PC job. Rail is modified for Left hand feed. Fitting is welded, does not leak. Cap on other end tapped for fuel pressure gauge (current one is broken, reads 20psi all the time). Will come complete with fuel lines, gauge, vibrant vacuum manifold, OE honda MAP & IAT w/pigtails, TWM TPS w/pig tail. $1200 + shipping
DDtech "rocket motorsports" M24XX's w/GE gears (will not separate) $700 + shipping
M24xx Intake .488/272 Exhaust .472/262
OPEN 28 BTDC; CLOSE 53 ABDC -Intake
OPEN 61 BBDC; CLOSE 21 ATDC -Exhaust
Supertech 12.5:1 85mm pistons on Eagle Rods (will not separate) - $450 + shipping
Prices are firm, no trades, cash only. Pickup preferred, but willing to ship on your dime.
Thread
Thread Starter
Forum
Replies
Last Post
eh2_Trav
For Sale
6
Nov 6, 2016 07:07 AM