I bought this JDM GSR Transmission with the intent to rebuild it, but I never had the chance to do it. The shop I bought it from stated that it was grinding on 3rd gear and popping out on 5th gear. Transmission is non-LSD and comes with the speed sensor.

I'm including a full set of 99 SI synchros. These synchros are in good condition, were taking out of my 99 SI transmission when I rebuilt it. The transmission was not grinding at all, just replaced them since I had it apart.

Asking 250$ for everything. I'm located in San Diego, CA.

If you have any questions, please contact me via PM or text for best response @ 858-401-9955

 

Anyone? This would be a good build for anyone needed a good tranny.

 

Sent you a txt, names ray shoot me a pm if anything

 

bump.......

 

bumpage....

 

Ttt

 

Text sent

 

shipped price to 18015

 

i got a roll cage for a dc . its a safety 21 . im willing to meet a little past bakersfield im from nor cal

 

The tranny weighs 80 lbs and my zip is 92123. That should give u enough info to find out how much shipping would be to your location.

Gas driving to Bakerfield would be to much from San Diego, would just not be worth it.

 

ttt

 

Due to many requests, I took the case cover off to look inside. I found some interesting things:

According to this link ( http://www.jdmuniverse.com/forums/ge...gear-help.html ) below are the B series teeth count for all gears. The bold are the counts for each gear that I got. Can anyone explain what I've got here?

Ring Gear
---------
LS- 64 teeth
GSR- 66 teeth
USDM/JDM B16A/B- 66 teeth
USDM ITR- 66 teeth
JDM ITR- 67 teeth

First Gear
---------
ALL 13/42

Second Gear
------------
LS- 20/38
GSR- 20-38
B16 & B16B- 19/40
USDM & JDM ITR- 19/40

Third Gear
----------
LS-26/33
GSR-25/34
B16 & B16B- 24/35
USDM & JDM ITR-24/35

Fourth Gear
-----------
LS-29/30
GSR-29/330
B16 & B16B-28/31
USDM ITR-28/31
JDM ITR-29-30

Fifth Gear
---------
LS-35/25
GSR-33/26
B16 & B16B-33/28
USDM ITR-33/28
JDM ITR-33/26

 

So this is an ls tranny with gsr 2nd-5th? Need a gsr final drive(ring gear) and then it will be A gsr tranny? Where are the pros at i need a gsr tranny

 

I'm going to contact Synchrotec to see what they say.

 

Lmk my man