b18c(R) part out fully built N/A ej1
Thread Starter
Honda-Tech Member
Joined: Feb 2012
Posts: 20
Likes: 0
b18c(R) part out fully built N/A ej1
Selling my 10,000 money pit finally because i bought a 2010 civic si and no longer have time for the project car anymore
up for sale
-fully built ported and polished head (pr3) with supertech valvetrain in it and bronze valve guides. 3 angle valve job on it. Has about 5k since rebuild SoLD!!!!!
-buddyclub spec iv cams recommend over 12:1 comp but i used them with 11.4:1 and were sick in excellent condition. soold!!
-skunk 2 tuner cam gears soooldd!!!!
-b16a2 trans in excellent condition. no 3rd gear grinds or pop outs or anything shifts beautiful. SOOOLDD!!!
-jdm b18cR not even 1,000 miles on block. its been blue printed and has real spoon sports pistons in it with new oem type r rods. all parts on block are new oem honda parts. has been balanced and cranks been worked. possibly needs new oil control rings due to not seating right or my catch can was hooked up wrong.
-b series shift linkage SOOOLLLDDD!!
-b series axles and intermidate shaft SOOLLLDD!!
-comp. clutch kit. 6puck stage 4? 1000 miles on it. engages on/off its a must for 200+hp cars. SOLD!!
-b series hytech replica header decent shape no dents
- b series vibrant header has dent but is ok.
-rc engineering obd1 370cc injectors excellect condition comes with obd2 pig tails. SOLLLDD!!
-gates racing t belt like new!! b series! SOOLLD!!
-an obd1 converted obd2 bseries alternator
-real authentic ek9 catback exhaust with oem ctr muffler. fair condition. sounds sick.
-benen tow hooks polished front and rear front never used rear used. soolldd!!!
b16a2 block needs OIL control rings possibly. Could of just been my catch can not hooked up right.basically complete. has new waterpump.
-Act pressure plate and flywheel with oem disc with good amount of meat left.
-a ported gsr bloxs intake manifold i hand ported turned out awesome! Comes with all sensors and a port matched throttle body.
-half size radiator oem.
-obd2 crank senor. SOOOLLDD!!!
-slow motion racing polished fuel rail
-real spoon sports shift ****. SOOOLD!!
-eg6 side markers never used.
-b series motor mounts for eg/ej swap.
-stock b16 cams and gears
-Like New thermostat oem
-like new upper and lower b series radiator hoses oem.
-hondata intake gasket basically brand new 1000 miles SOOOLD!!
-p28 with crome chip b16 basemap has launch control and shift light check engine light all the goodies. SOOLD!!
-virgin p28
-virgin p2T b16a2
-the shell ill sell for like 500.00 or obo. (function 7 lcas on it too)
if interested in anything or prices its all obo. text me at 262-748-0374 name is jake. pics i can send in texts.
up for sale
-fully built ported and polished head (pr3) with supertech valvetrain in it and bronze valve guides. 3 angle valve job on it. Has about 5k since rebuild SoLD!!!!!
-buddyclub spec iv cams recommend over 12:1 comp but i used them with 11.4:1 and were sick in excellent condition. soold!!
-skunk 2 tuner cam gears soooldd!!!!
-b16a2 trans in excellent condition. no 3rd gear grinds or pop outs or anything shifts beautiful. SOOOLDD!!!
-jdm b18cR not even 1,000 miles on block. its been blue printed and has real spoon sports pistons in it with new oem type r rods. all parts on block are new oem honda parts. has been balanced and cranks been worked. possibly needs new oil control rings due to not seating right or my catch can was hooked up wrong.
-b series shift linkage SOOOLLLDDD!!
-b series axles and intermidate shaft SOOLLLDD!!
-comp. clutch kit. 6puck stage 4? 1000 miles on it. engages on/off its a must for 200+hp cars. SOLD!!
-b series hytech replica header decent shape no dents
- b series vibrant header has dent but is ok.
-rc engineering obd1 370cc injectors excellect condition comes with obd2 pig tails. SOLLLDD!!
-gates racing t belt like new!! b series! SOOLLD!!
-an obd1 converted obd2 bseries alternator
-real authentic ek9 catback exhaust with oem ctr muffler. fair condition. sounds sick.
-benen tow hooks polished front and rear front never used rear used. soolldd!!!
b16a2 block needs OIL control rings possibly. Could of just been my catch can not hooked up right.basically complete. has new waterpump.
-Act pressure plate and flywheel with oem disc with good amount of meat left.
-a ported gsr bloxs intake manifold i hand ported turned out awesome! Comes with all sensors and a port matched throttle body.
-half size radiator oem.
-obd2 crank senor. SOOOLLDD!!!
-slow motion racing polished fuel rail
-real spoon sports shift ****. SOOOLD!!
-eg6 side markers never used.
-b series motor mounts for eg/ej swap.
-stock b16 cams and gears
-Like New thermostat oem
-like new upper and lower b series radiator hoses oem.
-hondata intake gasket basically brand new 1000 miles SOOOLD!!
-p28 with crome chip b16 basemap has launch control and shift light check engine light all the goodies. SOOLD!!
-virgin p28
-virgin p2T b16a2
-the shell ill sell for like 500.00 or obo. (function 7 lcas on it too)
if interested in anything or prices its all obo. text me at 262-748-0374 name is jake. pics i can send in texts.
Last edited by lovemycoupeb18c; Jul 27, 2012 at 11:06 PM.
Thread Starter
Honda-Tech Member
Joined: Feb 2012
Posts: 20
Likes: 0
Re: b18c(R) part out fully built N/A ej1
Sorry guys only have my phone right now and wont upload TEXT FOR PICS. EVERYTHING IS STILL FOR SALE!. TEXT is going to be my fastest response also as i dont come on to check alot. thanks everyone for looking!
Trending Topics
Re: b18c(R) part out fully built N/A ej1
tnx bro rcvd the spoon duracon **** today. im very satified with it ....
BUMP FOR A VERY HONEST SELLER ............... AND FAST SHIPPING TOO..
BUMP FOR A VERY HONEST SELLER ............... AND FAST SHIPPING TOO..
Thread
Thread Starter
Forum
Replies
Last Post
unclebenwho
Mid-West (Sales)
33
Jul 23, 2008 07:34 PM
unclebenwho
For Sale
57
Jul 23, 2008 07:33 PM
racinhatch
Classifieds: Forced Induction
3
Apr 25, 2008 06:13 PM