Hey all I searched and found nothing.

In the process of Re assembling my countershaft on my b series trans and got up to the concave/conical washer and 32mm nut at the end.

It appears as if the concave side goes down (torwards 1st) and the convex torwards the nut

Could anyone verify this, as I just now realized it's conical and don't want to put it on wrong.

Thanks alot, can give pictures if you need!

 

there is a specific section for transmission related threads, you know...

 

concave towards gear, convex towards nut

(if you took a cross section, it'd be a > pointing to the nut.)