Ive been looking for some rims for my dc and idk what offset to run. i want to be completly flush with no tuck. Any advice?

 

It all depends on how wide of a wheel you're going to run, what size tire you'll have, and what you mean by "completely flush with no tuck".

 

i had rota grids 16x8 15 offset looked good... tires were 195-40-16...on my gsr dc2 00

 

"Poke" is hardly "flush", which is what the OP asked about.
Those tires are stretched.
They're also too small in diameter for the car.

 

Also depends on how much camber you want to run. I've seen people do the "hellaflush" with 16x8 0 Offset but ran a ridiculous amount of negative camber...

 

i would stick with anything above 30 unless you're trying to go for that hellaflush deep dish look.

 

Just as Matt said, "offset" is a completely irrelevant term when not paired with a width.

 

appears the op isn't coming back.

 

Ive ran the chikara rs7's in 15x8 +20 with 195/50's and only rolled fenders... Ive also ran 16x8 + 10 with 205/40's with a camber kit added.. But it all depends on your suspension, ride height, camber, toe, alignment settings, tire size, width, offsets, and some research lol... Hope that helps!