hey guys i just had my kswap done on my 97 coupe everything works just fine but my speed n rpms dont work at all i see theres two sensors going on the tranny one on the bottom end and one the top they both reach but dont fit at all so if any of u know a solution i would i preciate..if this help is a k20a2block and k24r head 6 speed

 

You HAD it done?

 

yeah

 

if you HAD it done and this problem arose,shouldnt the shop be responsible for fixing the problem?

 

^^That. If a shop did the swap, I would take it back to them. Who knows what they hacked up in the process. Hate to tell ya, but I think shops suck in general.

 

well yeah kinda it was a friend hook up u could say

 

http://www.hondata.com/techk20wiring.html

 

harsh..lol

ok...where to start..
do you have a multimeter?get behind the cluster and see if you're at least getting power to the gauge..

 

what tranny does it have? if its an 05-06 rsx-s tranny or 06+si tranny you need a converter box for the speed sensor signal.


if your rpms doesnt work then he ****ed up your swap most likely. its 1 wire splice from your factory ecu plug to the swap harness for the tach signal. unless accords are different.