i just rebuilt a f22a1 out of a 93 accord and im gettin ready to drop it in my 97 accord lx i got the whole motor the a1 intake manifold and a1 header and got ecu for a1 with jumper harness since going to use the f22b2 engine harness now im just wanderin if i will need anything else before i yank my motor and im out a car til its fixed lol didnt know if needed diff alternator bracket or if the b2 will fit thanks

 

The header on the 97 accord has a solid on piece down pipe. Its also shorter.
The 93 down pipe is longer and utilizes a flex pipe. Let us know how is fits.

 

And you can't just use the LX one since the exhaust ports have a different configuration on the F22A engines.

 

Clutch cable if its 5 speed!! Also ECU, wiring harness and a/c & power steering brackets!

 

What are you talking about a harness?
If you use the b2 engine harness All I think you will have to do is extend a few wires.

 

ok its in i had to extend like 2 sensors and clutch cable works but gotta figure out exhaust situation the a1 is longer any ideas guys

 

If you feel like cutting wires splicing them and rewiring but its not hard to pull out a wiring harness. Especially if the engine is already pulled. If everything matches up but like 1 or 2 wires then I would keep stock harness.