MD Testing waters - trade wanted built/boosted 94 integra
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Feb 2010
Posts: 1,852
Likes: 1
From: latitude 39.6 longitude 78.9
I've had this car for almost 3yrs and in that time it's been completely rebuilt. I'm getting bored of the car scene anymore so I'd like to trade for a nice daily such as an rsx type s,TL,Scion tc,4x4 truck and fishing boat with trailer Ac,Ps,Cruise,power interior ect ect. Just lmk what you got. The worst I can say is no. Not really interested in any EG,EK,DC,EF,DA ect ect. Black or Blue 00 Si is the only car I would even consider. Any questions just ask me and I'll answer them.
Car was tuned by John Kerr @ IMW in Carlisle,Pa It's set on 15psi right now which is 355whp. On 19psi it made 370whp and he said if I ran around 21/22psi it would make 400whp. Upgrading to a ramhorn would allow 400whp easy on about 19psi. The car runs strong. The video at the bottom is against an evo that made 470awhp. Car was tuned about 1 month ago. Motor was built over winter with new Oem gaskets and parts plus Cp pistons and Scat rods. Engine bay was done over winter. Car was painted 2yrs ago professionally and a few new oem parts were bought at the time. Chassis has 197,000
motor has 700. This car is almost 19 years old so it's not perfect. Please don't expect some flawless show car. I built it to drive and have fun with. I'm not some punk kid though who abuses it.










http://www.youtube.com/watch?v=q2Kn6vxuHCI
I'll try my best to list everything but I'm sure I'll miss a few things.
The car is rust free and in good shape. Paint is 2yrs old and the bay was all done over the winter including the new motor build.
Exterior - full re spray including jams and hatch 2yrs ago in May. Rear wing was shaved and the rear wiper and antenna have been removed and oem honda plugs installed in place. New oem bumper with itr lip/98+ rear lights/amber front lights/8k hids/32% tint all around/oem window visors. the bay was color matched this past winter.
Engine Bay - Brake lines were tucked,fuel setup was tucked,fuse box is relocated under the airbag cover,battery is in the trunk,remote terminals in the bay,purple rad hoses,purple beauty washers,shaved valve cover.full size aluminum radiator with new overflow and cusco rad cap. Bolt boys bolts and washers for the motor mounts and shock tower nuts.
wheels - 16x7 rota boost on Dunlop Direzza DZ101. Fronts are about a month or 2 old and rears are about 6 months old. chrome muteki sr48 lugs 'steel'
suspension - progress cs2 coilovers and itr rear sway bar.
brakes - hawk hp pads f/r brembo blanks on F and advance rotors on R
interior - Was oem tan and I swapped it all out for black gsr interior. personal steering wheel with yellow stiching/spoon duracon **** with shifter extension/itr yellow stitch shift boot/quad pod bezel with aem wideband and autometer boost gauge. Has rockford power 6.5 in rear and infinity referencein the front with amp powering them./pioneer deck.
motor - New bottom end was built using Ls crank cp 9:8:1 pistons with Scat h beam rods 'Ls'. /arp head studs/bc valve train and itr cams/blox im/all new oem parts when assembled/ head has new seals/hasport billet street mounts,
tranny - gsr trans with new oem input shaft bearing/itr flywheel/cc stage 5 sprung clutch. Sometimes it grinds going into third at high rpm
turbo kit - inline pro manifold/precision sc34 57 trim .63 ar/3" dp with no cat and 3" exhaust with 2 magnaflow 3" muffflers/2.5" ic piping/27x10x3 fmic/precision 1000cc injectors/greddy type s bov/tial wastegate/ls ecu converted to vtec and running neptune. Buschur racing Mbc
Power steering,cruise control,Ac,srs and Abs have all been removed. A slight tuck was done when the motor was out. Headlight harness' mainly.
Car get's driven from late March till late October. No snow and rain only if I get caught in it.
Car was tuned by John Kerr @ IMW in Carlisle,Pa It's set on 15psi right now which is 355whp. On 19psi it made 370whp and he said if I ran around 21/22psi it would make 400whp. Upgrading to a ramhorn would allow 400whp easy on about 19psi. The car runs strong. The video at the bottom is against an evo that made 470awhp. Car was tuned about 1 month ago. Motor was built over winter with new Oem gaskets and parts plus Cp pistons and Scat rods. Engine bay was done over winter. Car was painted 2yrs ago professionally and a few new oem parts were bought at the time. Chassis has 197,000
motor has 700. This car is almost 19 years old so it's not perfect. Please don't expect some flawless show car. I built it to drive and have fun with. I'm not some punk kid though who abuses it.










http://www.youtube.com/watch?v=q2Kn6vxuHCI
I'll try my best to list everything but I'm sure I'll miss a few things.
The car is rust free and in good shape. Paint is 2yrs old and the bay was all done over the winter including the new motor build.
Exterior - full re spray including jams and hatch 2yrs ago in May. Rear wing was shaved and the rear wiper and antenna have been removed and oem honda plugs installed in place. New oem bumper with itr lip/98+ rear lights/amber front lights/8k hids/32% tint all around/oem window visors. the bay was color matched this past winter.
Engine Bay - Brake lines were tucked,fuel setup was tucked,fuse box is relocated under the airbag cover,battery is in the trunk,remote terminals in the bay,purple rad hoses,purple beauty washers,shaved valve cover.full size aluminum radiator with new overflow and cusco rad cap. Bolt boys bolts and washers for the motor mounts and shock tower nuts.
wheels - 16x7 rota boost on Dunlop Direzza DZ101. Fronts are about a month or 2 old and rears are about 6 months old. chrome muteki sr48 lugs 'steel'
suspension - progress cs2 coilovers and itr rear sway bar.
brakes - hawk hp pads f/r brembo blanks on F and advance rotors on R
interior - Was oem tan and I swapped it all out for black gsr interior. personal steering wheel with yellow stiching/spoon duracon **** with shifter extension/itr yellow stitch shift boot/quad pod bezel with aem wideband and autometer boost gauge. Has rockford power 6.5 in rear and infinity referencein the front with amp powering them./pioneer deck.
motor - New bottom end was built using Ls crank cp 9:8:1 pistons with Scat h beam rods 'Ls'. /arp head studs/bc valve train and itr cams/blox im/all new oem parts when assembled/ head has new seals/hasport billet street mounts,
tranny - gsr trans with new oem input shaft bearing/itr flywheel/cc stage 5 sprung clutch. Sometimes it grinds going into third at high rpm
turbo kit - inline pro manifold/precision sc34 57 trim .63 ar/3" dp with no cat and 3" exhaust with 2 magnaflow 3" muffflers/2.5" ic piping/27x10x3 fmic/precision 1000cc injectors/greddy type s bov/tial wastegate/ls ecu converted to vtec and running neptune. Buschur racing Mbc
Power steering,cruise control,Ac,srs and Abs have all been removed. A slight tuck was done when the motor was out. Headlight harness' mainly.
Car get's driven from late March till late October. No snow and rain only if I get caught in it.
Last edited by sc34dc4; Jun 1, 2012 at 01:09 PM.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Feb 2010
Posts: 1,852
Likes: 1
From: latitude 39.6 longitude 78.9
I was asking 9k before the winter makeover and that wasn't cheap. Feel free to make me an offer and we will go from there.
Trending Topics
Nice teg. Bump for you.
http://hondamarketplace.com/showthread.php?t=3057236
Let me know if you're interested.
http://hondamarketplace.com/showthread.php?t=3057236
Let me know if you're interested.
Thread
Thread Starter
Forum
Replies
Last Post
sc34dc4
Mid-Atlantic (Sales)
10
Jul 1, 2012 05:48 PM
cyclotegra
Vehicles for sale
14
Sep 13, 2009 03:38 PM
uneek4dr
Mid-Atlantic (Sales)
14
Feb 1, 2007 10:58 AM



