PLEASE READ i have a 1.5 in a eg. had a poor compression test result and smoked badddly. so i changed the head gasket. previous owner put a new rad into it. ( hint to over heating thinking it was the rad and running it for a period of time??) so i changed it and it still had water out the exhaust but passed the leak down test. so i changed the intake mani and new gasket ( i have tons of honda stuff ) still smoked so i un hooked the exhuast to see if it was just previous. and it was. it only smoked at high revs now. took the oil cap off to find lots of blow by. took the header off to find oil. took the into manifold off to find oil inside intake. i had cleaned the entire PCV system the box hoses and new valve. whats going on here?? bad rings?? cracked head making blow by??? i have the head off the car and dont wanna have to change it all. should i put a y7 on and try it or throw another bottom end in that i have??