F/S: OBDII LS Distributor, EK Side Markers, Wheel Locks, Misc D/B Series Stuff
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 3,492
Likes: 0
From: San Jose, CA, USA
F/S: OBDII LS Distributor, EK Side Markers, Wheel Locks, Misc D/B Series Stuff
-OBDII B18B/LS distributor. SOLD
-EK/BB4/BB6 side markers. This is a pair of JDM OEM Honda/Stanley amber side markers for 96-00 Civics, 92-96 Preludes, and 97-01 Preludes. I believe the Legend also used the same side markers, but I am unsure about the exact model years. These are in great condition with no cracks. They include both right and left markers; with sockets, bulbs, and wiring, although one of the metal clips is missing on the right marker and there's a broken tab on the left one. $25
-Gorilla Acorn wheel locks. These are (2)two sets of Gorilla Acorn wheel locks with keys. They are durable steel with a zinc coated finish in 12mm x 1.5 thread pitch which will fit a wide variety of manufacturers, including most Honda, Acura, Toyota, Lexus, Mazda, and Mitsubishi. They are for use with wheels that have a 60 degree conical/taper seat lug flange, so they won't work with wheels that have a ball seat lug flange. Protect your wheel investment with a set, or use both sets for added security. Make an offer on one or both sets.
-19mm extended lug sockets. These are (4)four extended lug sockets that came with a set of Advan wheels I had a long time ago. They work with 19mm(3/4") lug nuts, and their long reach is good for reaching into recessed lug flanges to give more clearance for your lug wrench and avoid scuffing or scratching your wheels. They're also good for use with extended wheel studs since you can keep one or more in your car for emergencies without having to carry arround the extended 19mm and ratchet from your socket set. The ends are made to work with standard 19mm sockets and lug wrenches, as well as a 3/8" ratchet. Make an offer on one or all of them.
-Exhaust pipe. This is a section of exhaust tubing with an OEM-style ball-socket flange. The flange is 2" and will mate up to OEM USDM size D/B series header/downpipe outlets. The piping starts out at about 2" in diameter and flares to 2.25", and the overall length is about 17.5". Use it to extend an EX/Si exhaust to fit your 96-00 CX/DX/LX Civic, or add a 3-bolt flange to the end to make a test pipe for other Hondas/Acuras. Make an offer.
-D16Y8 backup light switch. SOLD
________________
Buyers pay all shipping costs, if applicable.
I accept PayPal payments from verified accounts, and I ship only to confirmed addresses associated with those accounts. Cash is accepted in person, of course.
I am located in San Jose, Cali.
You can look up people I've done business with in my old F/S threads.
Thanks for looking.
-EK/BB4/BB6 side markers. This is a pair of JDM OEM Honda/Stanley amber side markers for 96-00 Civics, 92-96 Preludes, and 97-01 Preludes. I believe the Legend also used the same side markers, but I am unsure about the exact model years. These are in great condition with no cracks. They include both right and left markers; with sockets, bulbs, and wiring, although one of the metal clips is missing on the right marker and there's a broken tab on the left one. $25
-Gorilla Acorn wheel locks. These are (2)two sets of Gorilla Acorn wheel locks with keys. They are durable steel with a zinc coated finish in 12mm x 1.5 thread pitch which will fit a wide variety of manufacturers, including most Honda, Acura, Toyota, Lexus, Mazda, and Mitsubishi. They are for use with wheels that have a 60 degree conical/taper seat lug flange, so they won't work with wheels that have a ball seat lug flange. Protect your wheel investment with a set, or use both sets for added security. Make an offer on one or both sets.
-19mm extended lug sockets. These are (4)four extended lug sockets that came with a set of Advan wheels I had a long time ago. They work with 19mm(3/4") lug nuts, and their long reach is good for reaching into recessed lug flanges to give more clearance for your lug wrench and avoid scuffing or scratching your wheels. They're also good for use with extended wheel studs since you can keep one or more in your car for emergencies without having to carry arround the extended 19mm and ratchet from your socket set. The ends are made to work with standard 19mm sockets and lug wrenches, as well as a 3/8" ratchet. Make an offer on one or all of them.
-Exhaust pipe. This is a section of exhaust tubing with an OEM-style ball-socket flange. The flange is 2" and will mate up to OEM USDM size D/B series header/downpipe outlets. The piping starts out at about 2" in diameter and flares to 2.25", and the overall length is about 17.5". Use it to extend an EX/Si exhaust to fit your 96-00 CX/DX/LX Civic, or add a 3-bolt flange to the end to make a test pipe for other Hondas/Acuras. Make an offer.
-D16Y8 backup light switch. SOLD
________________
Buyers pay all shipping costs, if applicable.
I accept PayPal payments from verified accounts, and I ship only to confirmed addresses associated with those accounts. Cash is accepted in person, of course.
I am located in San Jose, Cali.
You can look up people I've done business with in my old F/S threads.
Thanks for looking.
Last edited by inspyral; May 11, 2012 at 06:29 PM.
Re: F/S: OBDII LS Distributor, EK Side Markers, Wheel Locks, Misc D/B Series Stuff
Thread
Thread Starter
Forum
Replies
Last Post
inspyral
Northern California (Sales)
2
May 9, 2012 09:24 AM
inspyral
For Sale
4
Mar 29, 2012 02:27 PM
