ETD Traction bar should fit JDM Crx right?

Reply Subscribe

Thread Tools

Search this Thread

Apr 25, 2012 | 07:06 PM

Vagitarian

Thread Starter

B*a*n*n*e*d

Joined: Dec 2009

Posts: 1,371

Likes: 1

ETD Traction bar should fit JDM Crx right?

I have a brand new ETD traction bar Ive been sitting on for a few years.

Im curious if it will bolt up no problems to my JDM Si Crx or if there are some reason the holes or radius rods would no fit

Appreciate any help!!

Apr 26, 2012 | 02:15 AM

TeamRedline89Hatch

Honda-Tech Member

Joined: Nov 2005

Posts: 730

Likes: 2

From: HK Garage

Re: ETD Traction bar should fit JDM Crx right?

Well I know an ef8 stock cross member does not fit the us crx. Not sure if aftermarket traction bars are any different mounting wise.

Apr 26, 2012 | 10:24 AM

BillB

Honda-Tech Member

Joined: Oct 2002

Posts: 320

Likes: 0

From: Stockton, UK, UK

Re: ETD Traction bar should fit JDM Crx right?

For a EF6 or EF7 chassis the US traction bars fit (I have one fitted to my EF7).

For an EF8 you need a bar made for a DA6 Integra

Watch out for the welds on the captive nuts snapping on the traction bars that only bolt to the towing eye bolt holes, I know of plenty of cars that have broken them myself included!

HTH

Bill