FS: 234 whp, 170 lb tq B18C1, Fluidyne, ACT, RC injectors, OEM DA Aero kit etc.
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 2,220
Likes: 0
From: OC, CA, USA
FS: 234 whp, 170 lb tq B18C1, Fluidyne, ACT, RC injectors, OEM DA Aero kit etc.
Feel free to contact me at burt.truong (at) gmail.com with any questions. Thanks for looking.
Located in SoCal. Costa Mesa area.
15) Laskey built B18C1 Benson sleeved 2.0L - 234hp, 170lb tq - $2800
The motor was built by Mike @ Laskey Racing.Most of the short block parts have less than 750 miles on them. I have the estimated mileage noted on all parts. This motor has been tuned and built properly. It was towed to Church Automotive after assembly to have it tuned and broken in on the dyno. She was tuned for 91 octane pump gas. Motor is already pulled from the car and ready for the new owner.
(VIDEO from previous owner)
95 B18C1
ShortBlock:
Benson Signature series sleeves
85mm CP Forged 11.5:1 pistons (750 miles)
Manley Pro Series I-Beam Turbo Tuff Connecting Rods (2750 miles)
ACL Bearings (750 miles)
MicroPolished / Balanced Crank (750 miles)
ARP head studs (2750 miles)
Cometic 85mm head gasket (750 miles)
Mugen Baffled oil pan
NEW OEM water pump (750 miles)
NEW OEM oil pump (750 miles)
Head:
Port/Polished head by RS Machines (7000 miles)
3 angle Valve job and inspection by Tom @ Portflow (750 miles)
Resurfaced head 2 times by Tom @ Portflow (750 miles)
Portflow Titanium retainers / dual valve springs (7000 miles)
Blox B cams (2750 miles)
Hondata IM gasket (750 miles)
JDM NGK blue plug wires (750 miles)
AEM cam sprockets (7000 miles)
NEW OEM timing belt (750 miles)
2) OEM Aero kit sides 90-93 Integra hatchback, complete with door caps, and end caps - $600 shipped, $500 picked up
Picture of sides installed (no door caps) on Pat's DA.
3) Fluidyne radiator for DA with FAL slim fan $280
4) RC 440 injectors (7000 miles) - $150
5) OEM DC2 GSR axles $80 for both firm - in excellent condition - no leaks
6) 93 RS black door panels good condition - $60 for both driver and passenger
7) IL4 Performance Maxx Bore Cast Throttle Body (actual throttle body for sale pictured)
The throttle body is maximum bored over to 73mm and is carefully tapered down to a 71mm back-end opening. $180 FIRM
8) RPS pressure plate + ACT street clutch (7000 miles) - $200
9) ACT 8.8lb flywheel (7000 miles) - $110
Located in SoCal. Costa Mesa area.
15) Laskey built B18C1 Benson sleeved 2.0L - 234hp, 170lb tq - $2800
The motor was built by Mike @ Laskey Racing.Most of the short block parts have less than 750 miles on them. I have the estimated mileage noted on all parts. This motor has been tuned and built properly. It was towed to Church Automotive after assembly to have it tuned and broken in on the dyno. She was tuned for 91 octane pump gas. Motor is already pulled from the car and ready for the new owner.
95 B18C1
ShortBlock:
Benson Signature series sleeves
85mm CP Forged 11.5:1 pistons (750 miles)
Manley Pro Series I-Beam Turbo Tuff Connecting Rods (2750 miles)
ACL Bearings (750 miles)
MicroPolished / Balanced Crank (750 miles)
ARP head studs (2750 miles)
Cometic 85mm head gasket (750 miles)
Mugen Baffled oil pan
NEW OEM water pump (750 miles)
NEW OEM oil pump (750 miles)
Head:
Port/Polished head by RS Machines (7000 miles)
3 angle Valve job and inspection by Tom @ Portflow (750 miles)
Resurfaced head 2 times by Tom @ Portflow (750 miles)
Portflow Titanium retainers / dual valve springs (7000 miles)
Blox B cams (2750 miles)
Hondata IM gasket (750 miles)
JDM NGK blue plug wires (750 miles)
AEM cam sprockets (7000 miles)
NEW OEM timing belt (750 miles)
2) OEM Aero kit sides 90-93 Integra hatchback, complete with door caps, and end caps - $600 shipped, $500 picked up
Picture of sides installed (no door caps) on Pat's DA.
3) Fluidyne radiator for DA with FAL slim fan $280
4) RC 440 injectors (7000 miles) - $150
5) OEM DC2 GSR axles $80 for both firm - in excellent condition - no leaks
6) 93 RS black door panels good condition - $60 for both driver and passenger
7) IL4 Performance Maxx Bore Cast Throttle Body (actual throttle body for sale pictured)
The throttle body is maximum bored over to 73mm and is carefully tapered down to a 71mm back-end opening. $180 FIRM
8) RPS pressure plate + ACT street clutch (7000 miles) - $200
9) ACT 8.8lb flywheel (7000 miles) - $110
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tb0y
Southern California (Sales)
4
Jun 13, 2015 04:50 PM
