204 WHP B-series swap, EM1 body parts, Civic, Integra, SI Wheels/ BUY FROM KPTRULEE!
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Mar 2003
Posts: 11,043
Likes: 0
From: D-TOWN IOWA!
204 WHP B-series swap, EM1 body parts, Civic, Integra, SI Wheels/ BUY FROM KPTRULEE!
The SI is gone 
and here are the parts left from it
Fully built b-series longblock $2400
Stroked 1.9 ltr GSR/ITR Block Built by RS Machine
- ITR- Portflow Head and Valvetrain
- Skunk2 Cam Gears
- JDM 4-1 header
- Hondata Tuned by Shawn Church
- AEM FPR
- Tri-Y Header (NEW)
- Energy Suspension shifter bushings
Healthy N/A b-series. Put down 203.1 whp on stock ITR cams, header, and exhaust. Should put down more with a better flowing exhaust and header.
Found old email with more specs:
Japanese ITR block
LS Crank
LS Rods, shot peened
USDM ITR pistons, 1 oversize.
Built by RS Machine
Aside from the LS crank and rods, all is 97 spec US ITR (injectors, manifold, etc)
Estimated 11:1 compression.
Head
USDM ITR head
Fully built by Portflow
Port/Polish
Portflow stiffer valve springs
Full valve job
Milled 0.020”
USDM ITR cams
Oversized throttle body,Holley (manifold was match ported)
99-00 Civic Hood $80
00 Coupe Sideskirts $40
B-series passenger side axle
PR3 cam gears
Charcoal canister off EM1 $40
DC2 B-series Shift linkage $75
Located in Iowa. Paypal and S/h will be an extra fee on top of prices listed. Thanks
and here are the parts left from itFully built b-series longblock $2400
Stroked 1.9 ltr GSR/ITR Block Built by RS Machine
- ITR- Portflow Head and Valvetrain
- Skunk2 Cam Gears
- JDM 4-1 header
- Hondata Tuned by Shawn Church
- AEM FPR
- Tri-Y Header (NEW)
- Energy Suspension shifter bushings
Healthy N/A b-series. Put down 203.1 whp on stock ITR cams, header, and exhaust. Should put down more with a better flowing exhaust and header.
Found old email with more specs:
Japanese ITR block
LS Crank
LS Rods, shot peened
USDM ITR pistons, 1 oversize.
Built by RS Machine
Aside from the LS crank and rods, all is 97 spec US ITR (injectors, manifold, etc)
Estimated 11:1 compression.
Head
USDM ITR head
Fully built by Portflow
Port/Polish
Portflow stiffer valve springs
Full valve job
Milled 0.020”
USDM ITR cams
Oversized throttle body,Holley (manifold was match ported)
99-00 Civic Hood $80
00 Coupe Sideskirts $40
B-series passenger side axle
PR3 cam gears
Charcoal canister off EM1 $40
DC2 B-series Shift linkage $75
Located in Iowa. Paypal and S/h will be an extra fee on top of prices listed. Thanks
Last edited by kptrulee; Oct 8, 2012 at 12:45 PM.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Mar 2003
Posts: 11,043
Likes: 0
From: D-TOWN IOWA!
Re: 204 WHP B-series swap, EM1 body parts, Civic, Integra, SI Wheels/ BUY FROM KPTRUL
SI lip, front bumper w/ fogs and grill are sold!
Rear bumper is EBP and hood is stripped so it needs primered and paint
Rear bumper is EBP and hood is stripped so it needs primered and paint
Honda-Tech Member
Joined: Feb 2004
Posts: 469
Likes: 0
From: Wiscago, usa
Re: 204 WHP B-series swap, EM1 body parts, Civic, Integra, SI Wheels/ BUY FROM KPTRUL
stock civic SI piping (all welded together and no muffler, EM1 SI) $50
