relatively new ep3 owner here.
I recently came up on a good deal on a receiver and 4x 6.5" speakers for the front and rear.
I understand that I need the in-dash kit and mounts for the fronts.

http://www.crutchfield.com/p_1209978...eiver-Kit.html
http://www.crutchfield.com/p_1208275...s.html?tp=2824

Do i need anything else to install properly? i apologize for the noob question, but trying to save a bit of money. thanks!

 

obviously question but did you buy the wiring kit?

 

are these what you are referring to?
http://www.crutchfield.com/p_1207017...ir=FFCategory|
http://www.crutchfield.com/p_1207101...Harnesses.html

So i've got:
- in dash receiver kit
- mounting brackets for the front and back
- 2 pairs of speaker harnesses
- 1 receiver harness

 

^yup pretty much. That should really be about it.... some misc things like electrical tape, butt connectors or soldering gun... zip ties, etc.

 

great. thanks for your help. really appreciate it.

 

you are going to need some speaker adapters for the fronts or just drill them into the door cause they dont have holes for the speaker

 

Does anyone know where you can get adapters for the speakers for an RSX?