WTB: Built Block - Sleeved - b18c, c1, c5 Etc
Honda-Tech Member
Joined: Aug 2006
Posts: 54
Likes: 0
From: USA!
Re: WTB: Built Block - Sleeved - b18c, c1, c5 Etc
Short block dart b20, 8.5 to 1 cp pistons 84.5mm with eagle rods and eagle crank.
$4500.00 obo if interested.
The short block was built by Machine shop here in South Jersey.
I bought the block a few years back and now I am going a different way. The engine is still @ the machine shop been there for about 10 months cause I havent had the time to pick it up. So I dont have pics to send you, However I am gonna pick up within the next few weeks.
Not sure if this is something that you would be interested in, would rather not ship cause that could get expensive. However if you wish to have it shipped I will see what it would cost.
Email me: Hndbst@aol.com
thanks.
$4500.00 obo if interested.
The short block was built by Machine shop here in South Jersey.
I bought the block a few years back and now I am going a different way. The engine is still @ the machine shop been there for about 10 months cause I havent had the time to pick it up. So I dont have pics to send you, However I am gonna pick up within the next few weeks.
Not sure if this is something that you would be interested in, would rather not ship cause that could get expensive. However if you wish to have it shipped I will see what it would cost.
Email me: Hndbst@aol.com
thanks.
Trending Topics
Re: WTB: Built Block - Sleeved - b18c, c1, c5 Etc
Short block dart b20, 8.5 to 1 cp pistons 84.5mm with eagle rods and eagle crank.
$4500.00 obo if interested.
The short block was built by Machine shop here in South Jersey.
I bought the block a few years back and now I am going a different way. The engine is still @ the machine shop been there for about 10 months cause I havent had the time to pick it up. So I dont have pics to send you, However I am gonna pick up within the next few weeks.
Not sure if this is something that you would be interested in, would rather not ship cause that could get expensive. However if you wish to have it shipped I will see what it would cost.
Email me: Hndbst@aol.com
thanks.
$4500.00 obo if interested.
The short block was built by Machine shop here in South Jersey.
I bought the block a few years back and now I am going a different way. The engine is still @ the machine shop been there for about 10 months cause I havent had the time to pick it up. So I dont have pics to send you, However I am gonna pick up within the next few weeks.
Not sure if this is something that you would be interested in, would rather not ship cause that could get expensive. However if you wish to have it shipped I will see what it would cost.
Email me: Hndbst@aol.com
thanks.
Keep them coming!
Honda-Tech Member
Joined: Sep 2008
Posts: 1,007
Likes: 0
From: Hillsborough, NJ
Re: WTB: Built Block - Sleeved - b18c, c1, c5 Etc
We have a used Benson sleeved bare GSR block for a great deal. $800 http://dpraceparts.com/collections/u...gsr-bare-block
And we can supply all the parts you need for it ;-)
And we can supply all the parts you need for it ;-)
Honda-Tech Member
Joined: Jun 2006
Posts: 246
Likes: 0
From: Speedway, IN
Re: WTB: Built Block - Sleeved - b18c, c1, c5 Etc
Block: B18B
Sleeves: ERL
Bore: 81.5mm
Piston & Compression: JE turbo pistons, probably 8.5
Rod: Crower
Crank: Stock I think
Who Sleeved the block: ERL
Who assembled the block: I may be able to find out soon.
Located in Indianapolis. May be parting it out in a week or 2.
Sleeves: ERL
Bore: 81.5mm
Piston & Compression: JE turbo pistons, probably 8.5
Rod: Crower
Crank: Stock I think
Who Sleeved the block: ERL
Who assembled the block: I may be able to find out soon.
Located in Indianapolis. May be parting it out in a week or 2.
Thread
Thread Starter
Forum
Replies
Last Post
K20teggg95
Acura RSX DC5 & Honda Civic EP3
4
Nov 4, 2011 06:44 AM
rtnlsltn
Classifieds: Forced Induction
2
Dec 23, 2006 05:23 PM
