CA FS FT 1997 JDM FRONT INTEGRA CEN CAL
1997 2dr Integra LS
5 speed
16xx,xxx miles
SALVAGE TITLE
HAS AC, HAS POWER STEERING
Motor:
B18C1 w/ dmv papers
I pulled swap from my 2000 GSR i junked, complete with gsr head & transmission
Motor has under 124,xxx miles
MOTOR HAS A BUILD, NOT STOCK. I HAVE RECIEPT FOR BUILD!
Head Specs:
P72 GSR HEAD
Real ITR Camshafts
CTR Adjustable CAM GEARS
New OEM Valves 3/12
New OEM Guides 3/12
New OEM Valve Seals 3/12
Valve Adjustment 3/14/12
Head resurfaced, cleaned, compression checked 3/12
Blox Cam Seal
Skunk2 2nd Generation Intake Manifold 68MM
Professional Products Throttle Body 68MM
AEM short RAM intake w/ C.A.R.B. sticker
Greddy Trust Headers w/ C.A.R.B. Number
Block Specs:
Rebuilt Block at 110,xxx miles so I could boost
8:2 compression pistons
Shot peened piston rod
ITR Exhaust piping out to OEM muffler
Tuned on a chipped P28 making 148whp with low compression.
Was planning to do turbo set up but have financial issues now
THIS MOTOR IS TURBO READY
WHEELS:
ROTA GT3 16x7 4x100 tires have 80% thread, one tire brand new
Suspension:
Front has brand spanking new Tokico HP Series shocks
Rear has same brand Tokico.
On Skunk2 springs all way round
GSR OEM Rear Sway Bar
Front Traction Bar set up
Clean interior, complete very nice.
Complete panels, tabs, rear trunk board, all the little things, etc.
All jams are paint, engine bay as well
Black leather 97 seats. Sit loow
Has original GSR cluster from my old gsr with original miles as motor
OEM Mudguards all way round with front fender liners
JDM Front End w/ H.I.D.s
ITR Spoiler
Sunroof
NGK spark plug cables
Dizzy is basically new
Lower Control Arms
Megan Tie bar
VIS CF Hood, has been restored, looks amazing
NRG QUICK RELEASE STEERWHEEL
Datum 1 Blue Tow Hook
NEW Headgasket, I have receipt
NEW rear motor mount, I have receipt
NEW timing belt, I have receipt
NEW tensioner, I have receipt
I HAVE RECIEPTS FOR HEAD WORK, ALL PARTS TOTALLING $700 NOT INCLUDING LABOR!
I KNOW WHAT MY BABY IS WORTH I PUT A LOT OF WORK INTO HER. GET HER WHILE THE GETTING IS GOOD. GAS PRICES ARE GOING TO SOAR THIS SUMMER ;P
TOM FROM REVSPEED, CA DID MY BLOCK WORK, HE CAN VOUCH FOR THESE PARTS
HIT ME UP
559-618-1627
ASKING 6,000
THIS ISNT SOME ILLEGAL BUILD, GHETTO SET-UP, THIS IS LEGIT AND PASSES SMOG. WILL COME WITH SALE








BUFF AND WAX 5-5-12



Fender painted








5 speed
16xx,xxx miles
SALVAGE TITLE
HAS AC, HAS POWER STEERING
Motor:
B18C1 w/ dmv papers
I pulled swap from my 2000 GSR i junked, complete with gsr head & transmission
Motor has under 124,xxx miles
MOTOR HAS A BUILD, NOT STOCK. I HAVE RECIEPT FOR BUILD!
Head Specs:
P72 GSR HEAD
Real ITR Camshafts
CTR Adjustable CAM GEARS
New OEM Valves 3/12
New OEM Guides 3/12
New OEM Valve Seals 3/12
Valve Adjustment 3/14/12
Head resurfaced, cleaned, compression checked 3/12
Blox Cam Seal
Skunk2 2nd Generation Intake Manifold 68MM
Professional Products Throttle Body 68MM
AEM short RAM intake w/ C.A.R.B. sticker
Greddy Trust Headers w/ C.A.R.B. Number
Block Specs:
Rebuilt Block at 110,xxx miles so I could boost
8:2 compression pistons
Shot peened piston rod
ITR Exhaust piping out to OEM muffler
Tuned on a chipped P28 making 148whp with low compression.
Was planning to do turbo set up but have financial issues now
THIS MOTOR IS TURBO READY
WHEELS:
ROTA GT3 16x7 4x100 tires have 80% thread, one tire brand new
Suspension:
Front has brand spanking new Tokico HP Series shocks
Rear has same brand Tokico.
On Skunk2 springs all way round
GSR OEM Rear Sway Bar
Front Traction Bar set up
Clean interior, complete very nice.
Complete panels, tabs, rear trunk board, all the little things, etc.
All jams are paint, engine bay as well
Black leather 97 seats. Sit loow
Has original GSR cluster from my old gsr with original miles as motor
OEM Mudguards all way round with front fender liners
JDM Front End w/ H.I.D.s
ITR Spoiler
Sunroof
NGK spark plug cables
Dizzy is basically new
Lower Control Arms
Megan Tie bar
VIS CF Hood, has been restored, looks amazing
NRG QUICK RELEASE STEERWHEEL
Datum 1 Blue Tow Hook
NEW Headgasket, I have receipt
NEW rear motor mount, I have receipt
NEW timing belt, I have receipt
NEW tensioner, I have receipt
I HAVE RECIEPTS FOR HEAD WORK, ALL PARTS TOTALLING $700 NOT INCLUDING LABOR!
I KNOW WHAT MY BABY IS WORTH I PUT A LOT OF WORK INTO HER. GET HER WHILE THE GETTING IS GOOD. GAS PRICES ARE GOING TO SOAR THIS SUMMER ;P
TOM FROM REVSPEED, CA DID MY BLOCK WORK, HE CAN VOUCH FOR THESE PARTS
HIT ME UP
559-618-1627
ASKING 6,000
THIS ISNT SOME ILLEGAL BUILD, GHETTO SET-UP, THIS IS LEGIT AND PASSES SMOG. WILL COME WITH SALE








BUFF AND WAX 5-5-12



Fender painted








Last edited by 14baldo66; Aug 28, 2012 at 08:57 PM. Reason: update


