FS PA: EK and EM1 parts
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 842
Likes: 0
From: usa
FS PA: EK and EM1 parts **UPDATED**
Everything is marked down 35% or more!!
I have the following parts for sale.
Most of the parts were taken off my EM1 with 30,000 to 50,000 miles on them.
I am located near the Lansdale exit of the North East Extension (476) about 45min north of Philly or 30min south of Allentown. Willing to ship most items if the buyer pays.
Please bump it if you read it……
I have the following parts for sale.
Most of the parts were taken off my EM1 with 30,000 to 50,000 miles on them.
I am located near the Lansdale exit of the North East Extension (476) about 45min north of Philly or 30min south of Allentown. Willing to ship most items if the buyer pays.
• EM1 suspension. I believe it is complete with the exception of the top hats and dust boots. The piece that was cut off the bump stop was used on my after market suspension. Everything pictured is included - SOLD to ccrelan
• EM1 gray trunk lining (Cut for Koni adjustable shocks) - SOLD to yblegal
• EM1 gray rear trunk plastic (Some scratches) - SOLD to yblegal
• EM1 gray A-pillar (Drilled for Auto Meter full length dual gauge pod) - was $25.00 now $16.00
• Auto Meter full length gray dual gauge pillar pod (Fits above A-pillar) - was $20.00 now $13.00
• EM1 rear sway bar with endlinks, bushings and one mounting bracket (one bracket is missing) - SOLD to ccrelan
• EM1 washer bottle - SOLD to ARMprod
• EM1 cruise control - SOLD to Nick MC
• EM1 charcoal canister with sensors - SOLD to Nick MC
• EM1 breather box w/bracket (Black box on the back of the engine for the PCV valve) - SOLD to Nick MC
• EM1 seat rail one side only (Side with the slider arm) - was $35.00 now $22.00
• EM1 fuel injectors - SOLD to ProjectEGSiR
• EM1 fuel pump - was $20.00 now $13.00
• EM1 gray pocket below the radio - was $5.00 now $3.00
• EM1 front lower splash guard/air dam - was $30.00 now $19.00
• EM1 complete A/C from the fire wall forward. Had about 35,000 miles on the system when removed and worked 100%. Current condition is unknown due to age. Includes compressor, dryer canister, condenser, hardlines, fan and other odds and ends – SOLD to Nick MC
• EM1 strut tower bar - SOLD to Nick MC
• EM1 front and rear brake lines (Replaced them with steel braided lines) – Best offer
• Rear T-bracket from a D-series EK with hardware - was $40.00 now $26.00
• B16A2 Stock exhaust manifold - Sold to gloria2323
• Aftermarket B-Series 160 degree thermostat (Brand new) - was $15.00 now $9.00
• EM1 rear center seat belt with hardware - was $5.00 now $3.00
• B16A2 crank sensor - was $40.00 now $26.00
• B16A2 map sensor - was $30.00 now $19.00
• B16A2 IAT sensor - SOLD to ProjectEGSir
• Misc EM1 hoses and brackets - Sold to Nick MC
• EM1 intake resonator - SOLD to Nick MC
• EM1 gray arm rest w/mounting hardware mint - Sold to ZenDigital
• EK Auto Meter gauge bezel (Brand new). I may have the original instructions. If not they are available online - was $45.00 now $29.00
Please bump it if you read it……
Last edited by simike; Apr 20, 2012 at 04:16 PM. Reason: Discount prices
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 842
Likes: 0
From: usa
Re: FS PA: EK and EM1 parts
Sway bar is still available. Strut tower bar is pending. I'm in Lansdale Pa.
Sure, that's easy enough to box up and ship. PM me your zip and I will get you a shipping quote.
Sure, that's easy enough to box up and ship. PM me your zip and I will get you a shipping quote.
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 842
Likes: 0
From: usa
Re: FS PA: EK and EM1 parts
[QUOTE=mmcd;46639219]
PM sent
The following items are pending sale. I will update/pm second in line as I receive payment or buyers flake.
Stut tower bar
Charcoal canister
Cruise control
Intake resonator
Arm rest
PCV hoses/box
Sway bar
The following items are pending sale. I will update/pm second in line as I receive payment or buyers flake.
Stut tower bar
Charcoal canister
Cruise control
Intake resonator
Arm rest
PCV hoses/box
Sway bar