just wondering, to change the front disc brakes to 10.5, do i need the calipers and stuff from the integra or only the discs?

 

i just did this, use the whole knuckle from the integra, and the stock upper control arm. just put in a 91 CRX SI master cylinder, 90 teg LS prop. valve and braided lines, now for some fluid, then i will be able to drive it again!

 

yep exactly what he said

derek

 

The 15/16'' non-abs integra '90-'93 master give better results than the 7/8'' crx 'si master. I had the crx master and I changed for an integra master on my '91 HB civic. The crx master do the job, but the integra do the job really well.


Sorry if my english is not really really good... I talk french.


I'm new here, and Honda-tech is a good ressource.