92 hatch for sale *fully built*
I am asking $9200.00 OR BEST OFFER, please dont hesitate to shoot me some offers as you never know I may just accept your offer!!!!
Email me at
tinctorus@aol.com OR send me a PM on here
The time has come for me to sell my beloved 92 cx eg hatchback, THe car is FULLY built and ran a 12.2 in the 1/4 mile on drag radials
This is whats done to the car/engine
1) Darton sleeves
2) JE pistons 12:5 to1
3) Eagle hp rods
4) Eagle block guard
5) JDM polished crank
6) JDM tyoe R head
7) Skunk pro 2 cams
8) Port and Polished head
9) Head port match to 70mm
10) Skunk 2 retainers,springs and valves
11) AEM adjustable cam gears
12) BBK 70MM Throttle body
13) ALL new sensors on motor
14)Custom 2 1/2 inch magnaflow exhaust
15) Hitech 4 into 1 full race headers
16) ACT 10lb flywheel
17) BRAND NEW TRANSMISSION with LESS THAN 1000 miles on it
18) ACT 4 puck clutch
19) New input and output shaft bearings
20) New JDM LSD
21) 4.47 final drive
22) B&M short shifter
23) Blox velocity stack intake
24) Honda P28 computer with hondata flasj
25) car dynoed 227 hp at the wheels on the dyno at HPC
26) Car dynoed 234 hp at eh wheels on race gas at HPC
27) Type R intake manifold
28) New rotors
29) new wheel bearings
30) Skunk 2 PRO adjustable control arms
31) New walbrough 255
32) AEM fuel pressure regulator
33) STP hgih flow fuel rail " polished aluminum
34) JDM coin pocket
35) JDM Optional audio console
36) ARP head studs



The interior of the car WILL be put back together before it is purchased, I have ALL of the interior pieces, the only thing it needs is a new glove box "I have the glove box but one of the tabs is broken so it moves around a little bit
Also the door panel will be put back on as well as the power door lock acuators for the aftermarket door locks to be hooked up to the alrm, The interior of the car is dynamattedso as to keep out roud noise and give you a nice quite sound in the interor of the car...I also have a number of A/C parts to be installed into the car "a/c control panel,blower motor with wire harness, a/c compressor,a/c bracket"
Email me at
tinctorus@aol.com OR send me a PM on here
The time has come for me to sell my beloved 92 cx eg hatchback, THe car is FULLY built and ran a 12.2 in the 1/4 mile on drag radials
This is whats done to the car/engine
1) Darton sleeves
2) JE pistons 12:5 to1
3) Eagle hp rods
4) Eagle block guard
5) JDM polished crank
6) JDM tyoe R head
7) Skunk pro 2 cams
8) Port and Polished head
9) Head port match to 70mm
10) Skunk 2 retainers,springs and valves
11) AEM adjustable cam gears
12) BBK 70MM Throttle body
13) ALL new sensors on motor
14)Custom 2 1/2 inch magnaflow exhaust
15) Hitech 4 into 1 full race headers
16) ACT 10lb flywheel
17) BRAND NEW TRANSMISSION with LESS THAN 1000 miles on it
18) ACT 4 puck clutch
19) New input and output shaft bearings
20) New JDM LSD
21) 4.47 final drive
22) B&M short shifter
23) Blox velocity stack intake
24) Honda P28 computer with hondata flasj
25) car dynoed 227 hp at the wheels on the dyno at HPC
26) Car dynoed 234 hp at eh wheels on race gas at HPC
27) Type R intake manifold
28) New rotors
29) new wheel bearings
30) Skunk 2 PRO adjustable control arms
31) New walbrough 255
32) AEM fuel pressure regulator
33) STP hgih flow fuel rail " polished aluminum
34) JDM coin pocket
35) JDM Optional audio console
36) ARP head studs



The interior of the car WILL be put back together before it is purchased, I have ALL of the interior pieces, the only thing it needs is a new glove box "I have the glove box but one of the tabs is broken so it moves around a little bit
Also the door panel will be put back on as well as the power door lock acuators for the aftermarket door locks to be hooked up to the alrm, The interior of the car is dynamattedso as to keep out roud noise and give you a nice quite sound in the interor of the car...I also have a number of A/C parts to be installed into the car "a/c control panel,blower motor with wire harness, a/c compressor,a/c bracket"
Last edited by tinctorus; Dec 5, 2011 at 06:05 PM.
"Fully Built" is grabbing attention, but your lack of details fail. You have clearly stated what is wrong (no AC, no door locks). I clicked on your thread and was disappointed. Show us what justifies a 10k asking price. Details my man!!!!
I fixed my original post to show everything that is included with the car and what all has been done to the car
Bump it up to the top!!!!
I'm willing to accept offers on the car as I REALLY need to get it moved to buy a truck and help with my dads medical bills
I'm willing to accept offers on the car as I REALLY need to get it moved to buy a truck and help with my dads medical bills
Bump to up to the TOP!!!!
I REALLY need this car gone to help pay medical bills and to finance my new company
NO reasonable offers will be turned down
I REALLY need this car gone to help pay medical bills and to finance my new company
NO reasonable offers will be turned down
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdmrobby
Vehicles for sale
25
Feb 15, 2013 07:25 AM



