F/S P-N-P RESISTOR BOX WITH HARNESS FOR EK
F/S P-N-P RESISTOR BOX WITH HARNESS FOR EK
I HAVE FOR SALE A PLUG-N-PLAY RESISTOR BOX FOR EK(96-00) ONLY.DONT WASTE YOUR TIME HACKING YOUR HARNESS UP OR TRYING TO FIGURE THE WIRING OUT.KEEP IT SIMPLE WITH THE HARNESS I'VE MADE.ALL YOU HAVE TO DO IS UNPLUG THE GREY DEAD PLUG AND PLUG THIS IN.IF YOU WANT TO REMOVE IT,JUST UNPLUG.EVERY WIRE HAS BEEN SOLDERED AND SHRUNK-WRAPPED,THEN TAPED UP AND WIRE LOOMED AND ONCE MORE TAPED UP.MADE IT A LITTLE LONG SO IT CAN BOLT UP TO YOUR FIREWALL.PRICE IS $60 SHIPPED INCLUDING PAYPAL FEES.RESISTOR IS ALSO INCLUDED.NOW ON TO THE PICS.........
HERE IS THE 14 PIN PLUG
THIS PIC IS SHOWING FEMALE AND MALE 14 PIN PLUGS
THIS ONE IS THE RESISTOR PLUG
HERE ARE OPPOSITE ENDS AND COMPLETE HARNESS:
PICS OF NEW HARNESS:
RESISTOR BOX:
FOR EG,DELSOL:
THIS IS THE END THAT PLUGS INTO THE EG HARNESS:
PEOPLE WHO HAVE PURCHASED ONE:
delsoljoe(clubcivic)
n008i3
JDMrasta
meng22
ivt-t
beanss
dj211855
rward18
Jason913
FAITHhasME(clubcivic.com)
HERE IS THE 14 PIN PLUG
THIS PIC IS SHOWING FEMALE AND MALE 14 PIN PLUGS
THIS ONE IS THE RESISTOR PLUG
HERE ARE OPPOSITE ENDS AND COMPLETE HARNESS:
PICS OF NEW HARNESS:
RESISTOR BOX:
FOR EG,DELSOL:
THIS IS THE END THAT PLUGS INTO THE EG HARNESS:
PEOPLE WHO HAVE PURCHASED ONE:
delsoljoe(clubcivic)
n008i3
JDMrasta
meng22
ivt-t
beanss
dj211855
rward18
Jason913
FAITHhasME(clubcivic.com)
Last edited by medjosh6; Feb 17, 2012 at 04:19 AM.
Honda-Tech Member
Joined: Aug 2008
Posts: 477
Likes: 0
From: 954, fl, broward
Re: F/S P-N-P RESISTOR BOX WITH HARNESS FOR EK
do you make these or this is just something you did one time? and also, whats your location im in margate, if your local i can just pick it up.
Re: F/S P-N-P RESISTOR BOX WITH HARNESS FOR EK
you know you want it.if you have a 96-00 EX,DX,LX,SI and want bigger injectors and require less ohms......this is what you need.dont splice and twist tie those wires......dont take a chance you wired something wrong.make it easy for yourself and your tuner................
Last edited by medjosh6; Dec 1, 2011 at 06:39 AM.
