Daytona Beach: Integra GSR built cylinder head.
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 542
Likes: 0
From: URANUS
Daytona Beach: Integra GSR built cylinder head.
Name is Craig and can be called/texted anytime @ (619) 944-8971. I accept cash or paypal only. Prices are negotiable and before shipping costs.
$600.00 - Integra GSR P72 ported and built cylinder head for any B series motor. This was sent to Portflow Designs in Feb 2009 for thier stage 1 porting and multi angle valve job. This is not polished, yet the airflow is virtually the same. I will provide the flow sheet from Portflow. The deck was checked with a precision straight edge and is good to go. This head has been cleaned up and is ready to run.
http://portflow.com/product.htm
This has OEM Integra Type R intake and exhaust valves, OEM Integra Type R intake and exhaust dual valve springs, and Crower titanium valve retainers. Also has VTEC solenoid, both coolant sensors, original cam caps and rails installed in the correct postions, and all misc hardware. All you need are cams and a cleanup and this is ready to go.
$600.00 - Integra GSR P72 ported and built cylinder head for any B series motor. This was sent to Portflow Designs in Feb 2009 for thier stage 1 porting and multi angle valve job. This is not polished, yet the airflow is virtually the same. I will provide the flow sheet from Portflow. The deck was checked with a precision straight edge and is good to go. This head has been cleaned up and is ready to run.
http://portflow.com/product.htm
This has OEM Integra Type R intake and exhaust valves, OEM Integra Type R intake and exhaust dual valve springs, and Crower titanium valve retainers. Also has VTEC solenoid, both coolant sensors, original cam caps and rails installed in the correct postions, and all misc hardware. All you need are cams and a cleanup and this is ready to go.
Thread
Thread Starter
Forum
Replies
Last Post
DignityStyle29
Texas -OK -LA (Sales)
5
Nov 27, 2012 05:10 PM
