I have a 90 crx DX that had melted the wiring through and through. about the same time, we had a friend that just had an integra that was totaled from a dent in the rear quarter.

So, everything plugged and played except the dome light, ac/blower controls, and windshield wiper wiring.

i am looking for wire color and pinout for the windshield wiper and ac blower controls on the crx end. i am also placing a request for the respective pinouts in another subforum.

 

look at your manual for diagrams.
and use google.

 

your funny, so if your magical fingers found it and i didnt, lets see it. otherwise your being a smart ****.

wait for it, i actually went to honda today. if you didnt notice all of my recent post that i actually do that.


tis is windshield wipers.

Constant - Green/Black
Hi - Blue/yellow
Lo - Blue
Intermittent Signal - Blue/white
Ground - Black

 

http://wikitest.pgmfi.org/twiki/bin/...ry/WireHarness


you know whats funny is an OBD2 conversion really has nothing to do with your dome lights and etc.

just look into your manual. not that hard, or as you do, go to honda and get the wire colors.

plus im not seeing anything on here that shows any of the accessories you posted above.

my guess would be check fuses. or re wire.