IA 92 prelude h23vtec turbo 500whp
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jun 2004
Posts: 983
Likes: 0
From: Des Moines, iowa, US
92 prelude h23vtec turbo 500whp
1992 Honda Prelude Si Blue pearl with minimal rust. time to move on. kid on the way.
car is located in des moines iowa. text me 515 249 3546
here is the parts list:
Motor:
H23a1 block sleeved by darton and bored to 2.4L
Manhly turbo tuff rods
ACL bearings
Wiesco Pistons 8.5 compression
Cometic head gasket
ARP head studs
stock crank
kaizen speed balance shaft removal kit.
H22a head completely built stage five from Blacktrax
Crower turbo camshafts
Crower springs, retainers
Supertech flat valves +1 over
5 angle valve job Port and Polish
Blacktrax stage 4 Intake Manifold
SKunk2 70mm throttle body
Hondata Gaskets
NRG fuel pressure regulator
STR Fuel rail
STR cam gears
Turbo Kit:
Cast T3 manifold with adapter pipe to T4 flange- jet coated
Garret GT35/76R
Tial 38mm wastegate
HKS Super sequential BOV
Spearco Intercooler 3 1/2" thick
RC Engineering 1600cc
Hondata S300 boost installed P28
B&R catch can
Tranny:
H23a1 grinds 3rd
Blacktrax 4 puck clutch
stock flywheel, axles
phantom grip lsd
Interior:
NRG quick release
Zeitronics tuning Zr-t2 with LCD
gutted no back seat, trunk or ceiling
Exterior:
NEEDS WORK paint mainly.
accord lip kit
JDM headlights black housing
Suspension:
suspension tech sway bars front and rear
koni yellow and gc coilovers
dc lower tie bar, and upper strut bars f/r
Explicit speed traction bar
Explicit speed motor mounts
***problems needs power steering and alternator belts and a retune.***
i can include or sell separate the following: accord front lip, oe front fenders, nsx brake upgrade includes all parts needed.
looking for around 8K obo.
car is located in des moines iowa. text me 515 249 3546
here is the parts list:
Motor:
H23a1 block sleeved by darton and bored to 2.4L
Manhly turbo tuff rods
ACL bearings
Wiesco Pistons 8.5 compression
Cometic head gasket
ARP head studs
stock crank
kaizen speed balance shaft removal kit.
H22a head completely built stage five from Blacktrax
Crower turbo camshafts
Crower springs, retainers
Supertech flat valves +1 over
5 angle valve job Port and Polish
Blacktrax stage 4 Intake Manifold
SKunk2 70mm throttle body
Hondata Gaskets
NRG fuel pressure regulator
STR Fuel rail
STR cam gears
Turbo Kit:
Cast T3 manifold with adapter pipe to T4 flange- jet coated
Garret GT35/76R
Tial 38mm wastegate
HKS Super sequential BOV
Spearco Intercooler 3 1/2" thick
RC Engineering 1600cc
Hondata S300 boost installed P28
B&R catch can
Tranny:
H23a1 grinds 3rd
Blacktrax 4 puck clutch
stock flywheel, axles
phantom grip lsd
Interior:
NRG quick release
Zeitronics tuning Zr-t2 with LCD
gutted no back seat, trunk or ceiling
Exterior:
NEEDS WORK paint mainly.
accord lip kit
JDM headlights black housing
Suspension:
suspension tech sway bars front and rear
koni yellow and gc coilovers
dc lower tie bar, and upper strut bars f/r
Explicit speed traction bar
Explicit speed motor mounts
***problems needs power steering and alternator belts and a retune.***
i can include or sell separate the following: accord front lip, oe front fenders, nsx brake upgrade includes all parts needed.
looking for around 8K obo.