CO: Freshly Rebuilt B18A1 Longblock
I'm selling a freshly built LS longblock. I rebuilt it myself and had all of the machine work done by GAM. I have paperwork for the machine work. This motor is brand new and has 0 miles on it. It has all new gaskets, king rod and main bearings, and new NPR piston rings. Spins great with no problems. I did a valve adjustment and everything is timed correctly. Here is a list of what comes with it:
- LS block and head (The head was decked and hot tanked. The block was hot tanked, honed, and cleaned again. The crank was polished.)
- Intake manifold
- Injectors
- Throttle body
- IAC valve
- FIT valve
- Obd0 distributor
- Full, uncut obd0 wiring harness
- Resistor box for injectors
- New timing belt
- 2 alternators w/ brackets (not sure if they work but I'm sure one if not both do)
- Rear motor mount
- extra set of b18 cams
There might be a couple sensors missing, but almost everything is there to drop it in. I'll try to find a throttle cable bracket and anything else it needs. Let me know if you have any questions about it. My friend has a shop and he said if you want it swapped, he can do it and find a transmission and whatever else it needs for a reasonable charge. We can work out something. I'm not shipping it. If you're in Colorado and would like to take a look or have some interest, please let me know. Asking $700.
- LS block and head (The head was decked and hot tanked. The block was hot tanked, honed, and cleaned again. The crank was polished.)
- Intake manifold
- Injectors
- Throttle body
- IAC valve
- FIT valve
- Obd0 distributor
- Full, uncut obd0 wiring harness
- Resistor box for injectors
- New timing belt
- 2 alternators w/ brackets (not sure if they work but I'm sure one if not both do)
- Rear motor mount
- extra set of b18 cams
There might be a couple sensors missing, but almost everything is there to drop it in. I'll try to find a throttle cable bracket and anything else it needs. Let me know if you have any questions about it. My friend has a shop and he said if you want it swapped, he can do it and find a transmission and whatever else it needs for a reasonable charge. We can work out something. I'm not shipping it. If you're in Colorado and would like to take a look or have some interest, please let me know. Asking $700.
Sadly I haven't been to colorado since I was 14 for national roller hockey championships lol Colorado Springs is sooo beautiful! And the mall with the ice rink in it is so cool!
Hahah totally wish I could, but driving there would suck, or getting the engine into the airport in a taxi and onto the plane would suck lol Good luck with the sale man, the motor looks so fresh.
Trending Topics
Where is this located in colorado I'm in garden city kansas and I'm looking for this exact set up I'm willing to drive awhile for this as long as its not to far can u please text my cell 620_290_2111
I'm in Greeley. I'm pretty sure I'm going to be selling it either today or tomorrow depending on the amount of snow, but I'll let you know if it doesn't go through.
Yes please my dad goes to greeley about once a week he is the manager of lextron animal health here "now international aminal health" so we can go down and pick it up please let me n say its for buisness please as soon as u find out I would like to know
Thread
Thread Starter
Forum
Replies
Last Post
LS-T
Classifieds: Forced Induction
2
Apr 17, 2003 09:07 PM




