This is like searching the Holy Grail!!! Does exist a 2.75" P&P exhaust for the 5th gen? I am in hurry, so I haven't the time to custom make one...

I have not found the Silk exh diameter, in photo it seems big.

 

Maybe Kteller can arrange a 2.75" piping kit specific for the 97 Prelude?

 

maybe call them or email them

 

i have not heard of 2.75 exhaust, but good luck finding it

 

A 3.00" exhaust will be fine if there is a P&P one...

 

Vibrant make a 3.0" TPV exhaust. Others?

 

Vibrant is discontinued, I'm desperate, find me something please :-(

 

Ok, I have decided for a custom 3" with the kteller kit.
What lenght is the best for the center and rear muffler with the kteller piping kit? Kteller tells me that 14" is OK for both center and rear muffler. Center muffler of 14" is pretty common, but for the rear seems a little small to me...

 

what exactly are your plans for getting exactly 2.75in exhaust piping??? unless your going turbo id see 3" piping for the car but even then turbos work better with no back pressure therefore having a cut out at the down pipe.... or if your running N/A 2.5" would be more than plenty which Greddy and Apexi make for a decent price... ie the Greddy SP2 elite and the Apexi WS2 for N/A set up....

 

2.5" exhaust is pretty small for a good allmotor H22, and 3" is an overkill.....but....I have ordered the kteller 3" piping kit.

Now I have to choose center resonator and rear muffler, I'm looking at vibrant. Someone tried the ULTRA QUIET center resonator?
http://vibrantperformance.com/catalo...1022_1033_1055

 

I have Vibrent 3" on my car. Flat black muffler with there regular resonator, It sounds nice but too loud for my taste, I ordered the ULTRA QUIET yesterday.